I have Iomega SC ix4-200d cloud edition Nas Product, I replaced all disk and flashed with this file emctools.7z by mistake
shows only IOMEGA logo, device dont start
can I rescue ?
2 posts • Page 1 of 1
Yes, can be done, but you'll need serial access, using some 3.3V TTL cable. The problem is that the CE uses another flash layout, which is imposed by the bootloader. Now a part of the firmware didn't fit, and the box can't boot. By uploading kernel and initrd over TFTP, you can get the box booted, and then you can provide the right imager stick.