LG N2R1D Help

LG Electronics
Post Reply
wlirio
Posts: 3
Joined: Mon Feb 16, 2015 10:52 pm

LG N2R1D Help

Post by wlirio » Mon Feb 16, 2015 11:06 pm

Hi, I have had my LG N2R1D for a number of years working great setup with 2 HD that are 2 TB As RAID1 mirrored. One of the HD failed and when I purchased a new 2 TB drive to replace the bad one it never did the Autosync. The new drive was listed as inactive. When I manually added it to the volume. The NAS because unresponsive. I let it run for a week and it still never finished. Not sure what it was doing as I only saw the new HD light flash and the HD icon on the LCD blink. I decided to back up my data to my PC before I went further. Once I did that I pushed Left + Right Buttons and Power to do a factory reset and start from scratch. My issue now is that I cannot seem to find a way to change from "Individual Disks (disk1,disk2)" setting.
Firmware version is 1.0.0_2660.

Thanks

See attached image
NAS.jpg
You do not have the required permissions to view the files attached to this post.

wlirio
Posts: 3
Joined: Mon Feb 16, 2015 10:52 pm

Re: LG N2R1D Help

Post by wlirio » Sun Mar 08, 2015 2:15 pm

Bump

Still cannot select the Raid volume

Post Reply