Hello, I have the LG N1A1 and wanted to upgrade the 1tb hard drive. After a little work, I discovered the process and wanted to share it with you guys. So here we go:
1) There are two black screws on the outside that need to be removed. One is located under the "void if removed sticker"
2) The Back cap will slide off. It is the end with the button labeled "Backup" (Pictured)
3) The white cover plate is held in place with two clips in the corners. I used a small flat head screwdriver to release the clips. (pictured)
4) Four screws hold the drive bracket in place. There is a fifth screw over the silver plate that also needs to be removed
Hope this helps
2 posts • Page 1 of 1