General NAS-Central Forums

Welcome to the NAS community
It is currently Sun Mar 18, 2018 11:55 am

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Mon Jan 04, 2016 8:03 pm 

Joined: Mon Jan 04, 2016 7:50 pm
Posts: 1
Hello, I have the LG N1A1 and wanted to upgrade the 1tb hard drive. After a little work, I discovered the process and wanted to share it with you guys. So here we go:

1) There are two black screws on the outside that need to be removed. One is located under the "void if removed sticker"

2) The Back cap will slide off. It is the end with the button labeled "Backup" (Pictured)

3) The white cover plate is held in place with two clips in the corners. I used a small flat head screwdriver to release the clips. (pictured)

4) Four screws hold the drive bracket in place. There is a fifth screw over the silver plate that also needs to be removed

Hope this helps

You do not have the required permissions to view the files attached to this post.

PostPosted: Sun Feb 21, 2016 5:25 am 

Joined: Sun Feb 21, 2016 5:05 am
Posts: 1
Did you replace the original 1TB Hard Disk easily?
Witch HDD you get (brand/size) any recommendation?
Mine original HDD is dyeing (SMART function is not responding anymore).
Thank you.

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group