FFP LIGHTTPD START ON BOOT

Everything that does not fit anywhere else
Post Reply
poolo46
Posts: 5
Joined: Wed Jan 17, 2018 8:09 pm

FFP LIGHTTPD START ON BOOT

Post by poolo46 » Thu Jan 25, 2018 4:14 pm

Please guys, help me.....

How can I start lighttpd server on boot, so i dont have to start it manually everytime a reboot my NAS (Zyxel 542).

Also, another question...How can I run lighttpd on Port 80 ? I know this topic was already discussed here, but I cant get it working.
I tried to change the HTTP CONNECTION setting in NAS Web Interface. And it worked, meaning that the web interface is running on another Port now.
I also changed lighttpd.conf to listen on Port 80.
However, when I try access my WebPage on Port 80 it still redirects me to the NAS Web interface Address and since it is already running on another port I get an 404 error !

Thanks for answer. :)

User avatar
Bitochen
Posts: 1
Joined: Thu Feb 22, 2018 9:42 am

Re: FFP LIGHTTPD START ON BOOT

Post by Bitochen » Thu Feb 22, 2018 10:00 am

Hey,poolo46.Check out this topic:
https://forum.nas-central.org/viewtopic ... 249&t=5973
There are a couple of things,that can help you with.
I managed. ;)
Regards Bitochen.

Post Reply