General NAS-Central Forums

Welcome to the NAS community
It is currently Sat Mar 17, 2018 2:32 pm

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Looqs Meebox
PostPosted: Thu Apr 05, 2012 2:22 pm 

Joined: Thu Apr 05, 2012 2:18 pm
Posts: 1
Hi all,

Ive recently gotten myself a Looqs Meebox Router Nas from Amazon dirt cheap (see ... 231&sr=8-1)

It kinda works, not without its little issues, and I was wondering if there's a forum for it here? or at least interest..

Interesting it already comes rooted out of the box, and Ive already been able to install /configure twonkyserver on it instead of MediaTomb..

Just wondering if anyone else has one of these..

some info from

cat /proc/cpuinfo
Processor : FA526id(wb) rev 1 (v4l)
BogoMIPS : 230.19
-- snip --
Hardware : GeminiA
Revision : 0000
Serial : 0000000000000000

cat /proc/mtd
dev: size erasesize name
mtd0: 00120000 00020000 "RedBoot"
mtd1: 00200000 00020000 "Kernel"
mtd2: 00600000 00020000 "Ramdisk"
mtd3: 00600000 00020000 "Application"
mtd4: 00020000 00020000 "VCTL"
mtd5: 000a0000 00020000 "CurConf"
mtd6: 00020000 00020000 "FIS directory"

 Post subject: Re: Looqs Meebox
PostPosted: Mon Mar 18, 2013 11:19 pm 

Joined: Mon Mar 18, 2013 10:58 pm
Posts: 1
I have one too :-)

I found that the processor and system used, is much the same as the one in a IB NAS4220 see:

Also the system is much the same as a gemini board:

And also Q-ONE NAS from Memup seems much the same: ... -_a74.html

When you need some already compiled linux binaries (you might chroot in it and build something?) you can for example get a stage 3 from gentoo: ... es/armv4l/

Also this (Psion seems also armv4l like) is usable for chroot environment or if in need for other binaries:

The disk image provided by the manufacturer is not necessary when one only wants to use this device only as NAS with ftp telnet nfs samba, these work even without the diskimage

Some info on the redboot (just for the idea, this is about another device): there some interesting ipk packages too:

This was what I could find...

I would like to know what jumper J7 on the board does... and if it is possible to boot from USB for example...

Good luck!

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group