General NAS-Central Forums

Welcome to the NAS community
It is currently Sat Nov 25, 2017 9:38 am

All times are UTC




Post new topic Reply to topic  [ 140 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next
Author Message
PostPosted: Fri Jan 15, 2016 8:06 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
:roll: :roll: :roll:
usb drive is already mounted !
and its mountpoint is /direct-usb/EFI-1

you must excuse my complete ignorance about the subject...I am doing all this from a completely novice level and am trying to understand it... :|
I actually though "being mounted" would also mean that I would be able to see it from the file explorer or wen interface and manage its files from there...Isn't that the case? Shouldn't I be able to open its file explorer by clicking on its name from the web interface?

Quote:
About usb disk size; can you post
Code:
gdisk -l /dev/sej
grep sej /proc/partitions

Code:
root@lacie5big:/direct-usb # gdisk -l /dev/sej
GPT fdisk (gdisk) version 0.8.5

Partition table scan:
  MBR: protective
  BSD: not present
  APM: not present
  GPT: present

Found valid GPT with protective MBR; using GPT.
Disk /dev/sej: 732558336 sectors, 2.7 TiB
Logical sector size: 4096 bytes
Disk identifier (GUID): 9F7E1CFC-8019-4A7B-9E08-E197923B4169
Partition table holds up to 128 entries
First usable sector is 6, last usable sector is 732558330
Partitions will be aligned on 8-sector boundaries
Total free space is 32768 sectors (128.0 MiB)

Number  Start (sector)    End (sector)  Size       Code  Name
   1               6           51205   200.0 MiB   EF00  EFI System Partition
   2           51206       732525562   2.7 TiB     AF00  ServerBackUp


Code:
root@lacie5big:/direct-usb # grep sej /proc/partitions
   8       64 2930233344 sej
   8       65     204800 sej1
   8       66 2929897428 sej2


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 8:16 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
So the firmware has mounted only the small partition sej1 and not sej2 which contains your data.
on sej2 seems to be an AF filesystem and it should be mounted at least with a ro access :?:

So post this output
Code:
file -bs /dev/sej2


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 8:31 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
So the firmware has mounted only the small partition sej1 and not sej2 which contains your data.
on sej2 seems to be an AF filesystem and it should be mounted at least with a ro access :?:

So post this output
Code:
file -bs /dev/sej2

Code:
root@lacie5big:/direct-usb # file -bs /dev/sej2
Macintosh HFS Extended version 4 data last mounted by: 'HFSJ', created: Thu Apr 12 20:59:37 2012, last modified: Fri Jan 15 19:52:11 2016, last checked: Thu Apr 12 18:59:37 2012, block size: 8192, number of blocks: 366237178, free blocks: 27175021


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 8:58 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
Maybe I identified why this partition is not mounted but I am sure that currently this file system is supported by the firmware.

As there is a not handy limitation with attachment on this board, I sent you a pm on plugout with a patch.
Install it as the others (put the archive in fvdw share and select it in the upload patch menu)
Control code is still the same (unzip).

After installing it post
Code:
cat /etc/patch_log
.

Then do a safe remove from the usb disks menu.
Detach the disk and plug again it.

Wait a bit time and reload usb disks menu. If all is ok you should have now 2 USB share "EFI-1" and "EFI-2". This last contains your data

Post also the output
Code:
mount


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 9:11 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
went a little ahead of myself and forgot the post before to unplug the USB...sorry...here it is:
Code:
root@lacie5big:/ # cat /etc/patch_log
[2016-01-12 21:37:58]   shell|shell   fvdw-sl 16.1   5big2   /file.php.zip(sda7rcS-patch.sh)   OK
[2016-01-12 21:39:23]   unzip|unzip   fvdw-sl 16.1   5big2   /file.php.zip(fvdw-sl-16.1-afpfix-remoteshr-11oct15.tar)   OK
[2016-01-12 21:40:06]   unzip|unzip   fvdw-sl 16.1   5big2   /file.php.zip(fvdw-sl-16.1-fix-autowakeup-03oct15.tar)   OK
[2016-01-12 21:40:42]   unzip|unzip   fvdw-sl 16.1   5big2   /file.php.zip(fvdw-sl-16.1-warning-iesupport-03dec15.tar)   OK
[2016-01-15 21:56:46]   unzip|unzip   fvdw-sl 16.1   5big2   /file.php.zip(fvdw-sl-16.1-hfs-15jan16.tar)   OK

Code:
root@lacie5big:/ # mount
rootfs on / type rootfs (rw)
/dev/root on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda1 on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)
none on /proc type proc (rw,relatime)
none on /sys type sysfs (rw,relatime)
none on /dev/pts type devpts (rw,relatime,mode=600)
/dev/sda5 on /rw_fs type ext3 (rw,noatime,errors=continue,barrier=1,data=ordered)
tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)
nfsd on /proc/fs/nfsd type nfsd (rw,relatime)
/dev/md0 on /share/1100 type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered)
/dev/root on /lacie-boot type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)


--edit-- still not mounted by the way...


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 9:15 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
indeed mount command must be done only after re-plugging the disk ;)


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 9:16 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
indeed mount command must be done only after re-plugging the disk ;)

that's what I've done...


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 9:20 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
so reboot the nas with your usb drive plugged


Top
 Profile  
 
PostPosted: Fri Jan 15, 2016 9:21 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
so reboot the nas with your usb drive plugged

yep, thought of that one as well :)


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 4:40 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
the weird thing is that I can cd to /dev, ls dev and see sej2 but cannot cd to sej2...

Do you have any other idea Jocko?


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 4:40 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
the weird thing is that I can cd to /dev, ls dev and see sej2 but cannot cd to sej2...

Do you have any other idea Jocko?


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 5:52 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
This is not the issue

I still wait the mount output after rebooting and what you see in the usb disks menu.


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 5:54 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
This is not the issue

I still wait the mount output after rebooting and what you see in the usb disks menu.


The mount output is the one I already posted (I've done it after rebooting) and the usb disks menu is exactly the same.


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 6:23 pm 
Offline

Joined: Thu Mar 08, 2012 7:47 pm
Posts: 93
macdalor wrote:
The mount output is the one I already posted
:roll: No as sej1 is not listed!!!

Then we go to use another way:

- unplug the USB drive (with the safe remove option)
- load this url http://yournasname/.status/nas-status.php
- enable the debug mode
- plug again the USB drive
- wait around 1 minute
- check the option "full log" and click on view log
- copy here fully the output

Disable after the debug mode


Top
 Profile  
 
PostPosted: Sat Jan 16, 2016 7:50 pm 
Offline

Joined: Mon Aug 29, 2011 4:50 pm
Posts: 88
Jocko wrote:
macdalor wrote:
The mount output is the one I already posted
:roll: No as sej1 is not listed!!!

Then we go to use another way:

- unplug the USB drive (with the safe remove option)
- load this url http://yournasname/.status/nas-status.php
- enable the debug mode
- plug again the USB drive
- wait around 1 minute
- check the option "full log" and click on view log
- copy here fully the output

Disable after the debug mode

Here you go:
Code:
status :0
# Partitions table:

GPT fdisk (gdisk) version 0.8.5

Partition table scan:

  MBR: protective

  BSD: not present

  APM: not present

  GPT: present

Found valid GPT with protective MBR; using GPT.

Command (? for help): Disk /dev/sda: 1953525168 sectors, 931.5 GiB

Logical sector size: 512 bytes

Disk identifier (GUID): 251066C4-F5DA-4B09-B5CE-1E0DBFB3FBF0

Partition table holds up to 128 entries

First usable sector is 34, last usable sector is 1953525134

Partitions will be aligned on 2048-sector boundaries

Total free space is 4062 sectors (2.0 MiB)

Number  Start (sector)    End (sector)  Size       Code  Name

   1            4096         1052671   512.0 MiB   8300  Linux filesystem

   2         1052672         2101247   512.0 MiB   8300  Linux filesystem

   3         2101248         3149823   512.0 MiB   8200  Linux swap

   4         3149824         3166207   8.0 MiB     8300  Linux filesystem

   5         3166208         4739071   768.0 MiB   8300  Linux filesystem

   6         4739072         4755455   8.0 MiB     8300  Linux filesystem

   7         4755456         5804031   512.0 MiB   8300  Linux filesystem

   8         5804032      1953525134   928.7 GiB   FD00  Linux RAID

Command (? for help):

# Platform: 5big2

# firmware version: fvdw-sl 16.1 patched

# Patch log:

[2016-01-12 21:37:58]     shell|shell     fvdw-sl 16.1     5big2     /file.php.zip(sda7rcS-patch.sh)     OK

[2016-01-12 21:39:23]     unzip|unzip     fvdw-sl 16.1     5big2     /file.php.zip(fvdw-sl-16.1-afpfix-remoteshr-11oct15.tar)     OK

[2016-01-12 21:40:06]     unzip|unzip     fvdw-sl 16.1     5big2     /file.php.zip(fvdw-sl-16.1-fix-autowakeup-03oct15.tar)     OK

[2016-01-12 21:40:42]     unzip|unzip     fvdw-sl 16.1     5big2     /file.php.zip(fvdw-sl-16.1-warning-iesupport-03dec15.tar)     OK

[2016-01-15 21:56:46]     unzip|unzip     fvdw-sl 16.1     5big2     /file.php.zip(fvdw-sl-16.1-hfs-15jan16.tar)     OK

[2016-01-16 16:52:05]     unzip|unzip     fvdw-sl 16.1     5big2     /file_usb.php.zip(fvdw-sl-16.1-hfs-15jan16.tar)     OK

# Kernel version:

Linux lacie5big.local 3.14.2 #8 PREEMPT Thu Sep 3 21:29:41 CEST 2015 armv5tel GNU/Linux

# Mount table:

rootfs on / type rootfs (rw)

/dev/root on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)

none on /proc type proc (rw,relatime)

none on /sys type sysfs (rw,relatime)

none on /dev/pts type devpts (rw,relatime,mode=600)

/dev/sda1 on / type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)

none on /proc type proc (rw,relatime)

none on /sys type sysfs (rw,relatime)

none on /dev/pts type devpts (rw,relatime,mode=600)

/dev/sda5 on /rw_fs type ext3 (rw,noatime,errors=continue,barrier=1,data=ordered)

tmpfs on /rw_fs/tmp/usr/var type tmpfs (rw,relatime,size=5000k)

nfsd on /proc/fs/nfsd type nfsd (rw,relatime)

/dev/md0 on /share/1100 type ext3 (rw,relatime,errors=continue,user_xattr,acl,barrier=1,data=ordered)

/dev/root on /lacie-boot type ext3 (rw,relatime,errors=continue,barrier=1,data=ordered)

# Process running:

  PID TTY      STAT   TIME COMMAND

    2 ?        S      0:00 [kthreadd]

    3 ?        S      0:00  \_ [ksoftirqd/0]

    5 ?        S<     0:00  \_ [kworker/0:0H]

    7 ?        S      0:01  \_ [rcu_preempt]

    8 ?        S      0:00  \_ [rcu_sched]

    9 ?        S      0:00  \_ [rcu_bh]

   10 ?        S<     0:00  \_ [khelper]

  242 ?        S<     0:00  \_ [writeback]

  244 ?        S<     0:00  \_ [bioset]

  246 ?        S<     0:00  \_ [kblockd]

  251 ?        S<     0:00  \_ [ata_sff]

  262 ?        S      0:00  \_ [khubd]

  269 ?        S<     0:00  \_ [md]

  279 ?        S<     0:00  \_ [cfg80211]

  295 ?        S<     0:00  \_ [rpciod]

  304 ?        S      0:00  \_ [kswapd0]

  305 ?        S      0:00  \_ [fsnotify_mark]

  306 ?        S<     0:00  \_ [nfsiod]

  307 ?        S<     0:00  \_ [cifsiod]

  311 ?        S      0:00  \_ [jfsIO]

  312 ?        S      0:00  \_ [jfsCommit]

  313 ?        S      0:00  \_ [jfsSync]

  314 ?        S<     0:00  \_ [xfsalloc]

  315 ?        S<     0:00  \_ [xfs_mru_cache]

  316 ?        S<     0:00  \_ [xfslogd]

  317 ?        S<     0:00  \_ [crypto]

  441 ?        S      0:00  \_ [scsi_eh_0]

  442 ?        S<     0:00  \_ [scsi_tmf_0]

  445 ?        S      0:00  \_ [scsi_eh_1]

  446 ?        S<     0:00  \_ [scsi_tmf_1]

  449 ?        S      0:01  \_ [kworker/u2:2]

  450 ?        S      0:00  \_ [kworker/u2:3]

  456 ?        S<     0:00  \_ [smflush]

  464 ?        S      0:00  \_ [spi0]

  517 ?        S<     0:00  \_ [aoe_tx0]

  518 ?        S<     0:00  \_ [aoe_ktio0]

  536 ?        S<     0:00  \_ [raid5wq]

  538 ?        S<     0:00  \_ [dm_bufio_cache]

  539 ?        S<     0:00  \_ [kmpathd]

  540 ?        S<     0:00  \_ [kmpath_handlerd]

  575 ?        S      0:00  \_ [mv_crypto]

  598 ?        S<     0:00  \_ [ipv6_addrconf]

  604 ?        S<     0:00  \_ [deferwq]

  682 ?        S<     0:00  \_ [kworker/0:1H]

  683 ?        S      0:00  \_ [kjournald]

  702 ?        S      0:00  \_ [kjournald]

  749 ?        S      0:00  \_ [kjournald]

  779 ?        S<     0:00  \_ [iscsi_eh]

 1284 ?        S<     0:00  \_ [bioset]

 1285 ?        S      0:01  \_ [md0_raid5]

 1512 ?        S      0:00  \_ [kjournald]

 1572 ?        S<     0:00  \_ [bond0]

 6498 ?        S      0:00  \_ [kworker/0:0]

 6746 ?        S      0:00  \_ [kworker/0:1]

 6819 ?        S      0:00  \_ [kworker/u2:0]

 6968 ?        S      0:00  \_ [kworker/0:2]

 7012 ?        S      0:00  \_ [kworker/0:3]

 7149 ?        S      0:00  \_ [scsi_eh_5]

 7152 ?        S<     0:00  \_ [scsi_tmf_5]

 7153 ?        S      0:00  \_ [usb-storage]

    1 ?        Ss     0:01 init     

  735 ?        Ss     0:00 /usr/sbin/buttonsd

  897 ?        Ss     0:00 /usr/sbin/fan-d

  918 ?        S<s    0:00 /sbin/udevd --daemon

 1274 ?        Ss     0:00 /sbin/mdadm --monitor --daemonise --scan --delay=600 --pid-file=/var/run/mdadm.pid

 1616 ?        Ss     0:00 /sbin/udhcpc -b -i bond0 -s /etc/api/api_dhcpc.php dhcpdCbScript

 1639 ?        Ss     0:00 /usr/bin/httpd -f httpd.conf -d /etc

 1648 ?        S      0:06  \_ /usr/bin/httpd -f httpd.conf -d /etc

 1844 ?        S      0:07  \_ /usr/bin/httpd -f httpd.conf -d /etc

 7310 ?        S      0:00      \_ sh -c sudo /etc/nas_status.sh --all 2>&1

 7311 ?        S      0:00          \_ /bin/sh /etc/nas_status.sh --all

 7329 ?        R      0:00              \_ ps axf

 1659 ?        Ss     0:00 /usr/sbin/nmbd -D -l /var/log/samba

 1662 ?        Ss     0:00 /usr/sbin/smbd -D -l /var/log/samba

 1663 ?        S      0:00  \_ /usr/sbin/smbd -D -l /var/log/samba

 2409 ?        S      0:00  \_ /usr/sbin/smbd -D -l /var/log/samba

 1684 ?        Ss     0:00 /usr/bin/rpcbind

 1700 ?        Ss     0:00 dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_host_key

 2996 ?        Ss     0:00  \_ dropbear -p 22 -r /rw_fs/etc/dropbear/dropbear_rsa_host_key

 3009 pts/0    Ss+    0:00      \_ -sh

 1713 ?        Ss     0:00 /usr/sbin/hostd 7200

 1968 ?        Sl     1:19 /share/1100/fvdw/addons/plexmediaserver/Plex Media Server

 2378 ?        SNl    1:21  \_ Plex Plug-in [com.plexapp.system] /share/1100/fvdw/addons/plexmediaserver/Resources/Plug-ins-e0b7243/Framework.bundle/Contents/Resources/Versions/2/Python/bootstrap.pyc --server-version 0.9.14.6.1620-e0b7243 /share/1100/fvdw/addons/plexmediaserver/Resources/Plug-ins-e0b7243/System.bundle

 2433 ?        Sl     0:07  \_ /share/1100/fvdw/addons/plexmediaserver/Plex DLNA Server

 2404 ?        Ss     0:00 /bin/sh

 7015 ?        Ss     0:00 /usr/sbin/noflushd -n 15 /dev/sda /dev/sdb /dev/sdd /dev/sde

 7137 ?        Ss     0:00 syslogd -b 5

# Boot log:

start boot log

detect and set platform

5big2

UIMAGE-3142-NWSP2CL-8

5big2

 mount dev/pts

update dev nodes

booting using sda1 root file system...

make dev node for buttons...

make dev node for tun device...

enable IP forwarding...

start buttons control daemon

device = 5big2

source = buttons-nwsp2

buttons-nwsp2 daemon started

Sat Jan 16 16:48:25 UTC 2016

create temporary passwd ***************

run udevstart to update dev nodes when necessary

inserting kernel modules:

create temporary group file

configure loopback network interface

setting reboot and standby

5big2

rebootd-nwsp2

5big2

standbyd-nwsp2

start fan

fan5big daemon started

starting php based setup routines step 1

 * Starting udevd...                           [ OK ]

 * Found XML database configuration file...      [ OK ]

 * Starting RAID monitor:                      [ OK ]

 * Starting restore RAID devices...

   - Assembling device /dev/md0:  [ OK ]

 * Finishing restore RAID devices...       [ OK ]

 * Updating Disks database...                 [ OK ]

 * Starting mount of volumes...

   - Mounting volume RD5-0:  [ OK ]

 * Finishing mount of volumes...            [ OK ]

 * Generating Hosts File...                 [ OK ]

 * Configuring System Hostname...            [ OK ] 

 * Configuring Bonding interface...       [ OK ]

 * Configuring LAN interface...            [ OK ]

 * Initializing Timezone...                 [ OK ]

 * Starting web server...                      [ OK ]

 * Starting mount of internal USB ...

   - Mounting volume EFI-1:  [ Fail ]

 * Finishing mount internal USB ...      [ Fail ]

 * Configuring Disks...                      [ OK ]

 * Configuring Samba...                          [ OK ]

 * Configuring System Users...

     Root password: use default password

     Set users, linux and samba accounts      [ OK ]

 * Starting Fvdw-sl Discovery Daemon...      [ OK ]

start rpcbind service

starting php based setup routines step 2

 * Starting dropbear...                      [ OK ]

 * Kill temporary dropbear...                [ OK ]

starting php based setup routines step 3

 * Starting daemon update Hosts File...  [ OK ]

 * Starting mount of remote shares...

 * Finishing mount shares...                 [ OK ]

 * Starting Plex Media Server...            [ OK ]

starting php based setup routines step banner

*** fvdw-sl NAS firmware

    This is fvdw-sl version: fvdw-sl 16.1 patched

    built on: Oct 01 2015

    LAN IP address: 192.168.1.41 (DHCP)

    Port configuration:

    LAN   -> bond0

php based setup routines finished

web permission on resolv.conf

set device tuning for dms performance

LED settings

else loop1 finished

rcS finished

# syslog file:

Jan 16 20:40:09 lacie5big syslog.info syslogd started: BusyBox v1.21.0

Jan 16 20:40:09 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/.status ; USER=root ; COMMAND=/etc/nas_status.sh --start-debug

Jan 16 20:40:09 lacie5big syslog.info syslogd exiting

Jan 16 20:40:09 lacie5big syslog.info syslogd started: BusyBox v1.21.0

Jan 16 20:40:09 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/.status ; USER=root ; COMMAND=/bin/ps -ef

Jan 16 20:41:10 lacie5big local0.warn API[2016/01/16 20:41:10] nasapi.inc(36)[7181]: nasapi: lock time = 0

Jan 16 20:41:10 lacie5big local0.warn API[2016/01/16 20:41:10] nasapi.inc(46)[7181]: calling mrvlUdevdeSatanoflushUP sej

Jan 16 20:41:10 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/is_esata sej

Jan 16 20:41:10 lacie5big local0.warn API[2016/01/16 20:41:10] nasapi.inc(670)[7181]: mrvlUdevdeSatanoflushUP sej Return Code: 0

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] nasapi.inc(36)[7207]: nasapi: lock time = 0

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] nasapi.inc(46)[7207]: calling mrvlUdevdAttached sej1

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/cat /etc/platform

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] udevfunc_attached.finc(34)[7207]: Request to attach sej1 for 5big2

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -t /dev/sej1

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] exthddfunc_mountUsbRpiHdd.finc(22)[7207]: Request to mount for sej1

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/usb_id -x /block/sej

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/sej1

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.update /rw_fs/etc/nas_conf_db.xml

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/mv -f /rw_fs/etc/nas_conf_db.xml.try /rw_fs/etc/nas_conf_db.xml.bak

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] exthddfunc_mountUsbRpiHdd.finc(402)[7207]: Try to mount the share (NAS is not booting)

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/chmod 777 /share/2000

Jan 16 20:41:11 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mount -t vfat -o umask=000,codepage=850,iocharset=utf8 /dev/sej1 /share/2000

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] exthddfunc_mountUsbRpiHdd.finc(429)[7207]: failed to mount sej1 at /share/2000

Jan 16 20:41:11 lacie5big local0.warn API[2016/01/16 20:41:11] nasapi.inc(670)[7207]: mrvlUdevdAttached sej1 Return Code: 1

Jan 16 20:41:12 lacie5big local0.warn API[2016/01/16 20:41:12] nasapi.inc(36)[7206]: nasapi: lock time = 1

Jan 16 20:41:12 lacie5big local0.warn API[2016/01/16 20:41:12] nasapi.inc(46)[7206]: calling mrvlUdevdAttached sej2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/cat /etc/platform

Jan 16 20:41:12 lacie5big local0.warn API[2016/01/16 20:41:12] udevfunc_attached.finc(34)[7206]: Request to attach sej2 for 5big2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -t /dev/sej2

Jan 16 20:41:12 lacie5big local0.warn API[2016/01/16 20:41:12] exthddfunc_mountExtHdd.finc(35)[7206]: Request to mount sej2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/vol_id -l /dev/sej2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/fdisk -l /dev/sej

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/sbin/gdisk -l /dev/sej

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mkdir -m 777 -p /mnt/ServerBackUp_2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/mount -t hfsplus -o noatime,ro /dev/sej2 /mnt/ServerBackUp_2

Jan 16 20:41:12 lacie5big local0.warn API[2016/01/16 20:41:12] exthddfunc_mountExtHdd.finc(146)[7206]: failed to mount sej2 at /mnt/ServerBackUp_2

Jan 16 20:41:12 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/mv_reg_bit_set 0x10108 6 1

Jan 16 20:41:17 lacie5big local2.notice sudo:     root : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/usr/bin/mv_reg_bit_set 0x10108 6 0

Jan 16 20:41:17 lacie5big local0.warn API[2016/01/16 20:41:17] nasapi.inc(670)[7206]: mrvlUdevdAttached sej2 Return Code: 1

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetVolumeAddons

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/sh -c /usr/bin/unlink /usr/local;/usr/bin/ln -s /share/1100/fvdw/addons /usr/local

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlGetVolumeAddons Return Code: 1100

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardStatus Return Code: Array():enable => 0...

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardCurrentStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardCurrentStatus Return Code: Array():enable => 0...

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlUsbModeStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlUsbModeStatus Return Code: internal

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardStatus Return Code: Array():enable => 0...

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/sbin/is_esata sej

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlUsbModeStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlUsbModeStatus Return Code: internal

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetDisk high all

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetDisk high all Return Code: Array():0 => Array()...

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetVolume high all

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/df

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/sbin/mdadm --detail /dev/md0

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/sbin/mdadm --detail /dev/md0

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/df

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetVolume high all Return Code: Array():0 => Array()...

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/sbin/vol_id -t /dev/sej1

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetFTPStatus

Jan 16 20:41:18 lacie5big local0.warn API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlGetFTPStatus Return Code: 0

Jan 16 20:41:18 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/global ; USER=root ; COMMAND=/bin/ps -ef

Jan 16 20:41:54 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/.status ; USER=root ; COMMAND=/bin/hostname

Jan 16 20:41:54 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/.status ; USER=root ; COMMAND=/usr/bin/cut -d . -f 1

Jan 16 20:41:54 lacie5big local2.notice sudo:   nobody : TTY=unknown ; PWD=/usr/htdocs/.status ; USER=root ; COMMAND=/etc/nas_status.sh --all

# Httpd errors file:

[Sat Jan 16 16:49:13.609830 2016] [auth_digest:notice] [pid 1639] AH01757: generating secret for digest authentication ...

[Sat Jan 16 16:49:13.964143 2016] [mpm_prefork:notice] [pid 1639] AH00163: Apache/2.4.7 (Unix) OpenSSL/1.0.1m PHP/5.6.6 configured -- resuming normal operations

[Sat Jan 16 16:49:13.964409 2016] [core:notice] [pid 1639] AH00094: Command line: '/usr/bin/httpd -f httpd.conf -d /etc'

[Sat Jan 16 20:39:24.228207 2016] [auth_basic:error] [pid 1844] [client 192.168.1.36:51434] AH01617: user admin-nas: authentication failure for "/.status/nas-status.php": Password Mismatch

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetVolumeAddons

API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlGetVolumeAddons Return Code: 1100

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardStatus

API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardStatus Return Code: Array():enable => 0...

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardCurrentStatus

API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardCurrentStatus Return Code: Array():enable => 0...

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlUsbModeStatus

API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlUsbModeStatus Return Code: internal

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetUsbGuardStatus

API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetUsbGuardStatus Return Code: Array():enable => 0...

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlUsbModeStatus

API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlUsbModeStatus Return Code: internal

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetDisk high all

API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetDisk high all Return Code: Array():0 => Array()...

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetVolume high all

API[2016/01/16 20:41:18] nasapi.inc(667)[1648]: mrvlGetVolume high all Return Code: Array():0 => Array()...

API[2016/01/16 20:41:18] nasapi.inc(36)[1648]: nasapi: lock time = 0

API[2016/01/16 20:41:18] nasapi.inc(46)[1648]: calling mrvlGetFTPStatus

API[2016/01/16 20:41:18] nasapi.inc(670)[1648]: mrvlGetFTPStatus Return Code: 0

# Samba smbd log:

[2016/01/16 16:49:14, 0] smbd/server.c:main(942)

  smbd version 3.0.37 started.

  Copyright Andrew Tridgell and the Samba Team 1992-2009

# Samba nmdb log:

[2016/01/16 16:49:14, 0] nmbd/nmbd.c:main(723)

  Netbios nameserver version 3.0.37 started.

  Copyright Andrew Tridgell and the Samba Team 1992-2009

[2016/01/16 16:49:14, 0] nmbd/nmbd_subnetdb.c:create_subnets(190)

  create_subnets: No non-loopback local interfaces !

[2016/01/16 16:49:14, 0] nmbd/nmbd_subnetdb.c:create_subnets(191)

  create_subnets: Waiting for an interface to appear ...

[2016/01/16 16:49:33, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282)

  dump_workgroups()

   dump workgroup on subnet    192.168.1.41: netmask=  255.255.255.0:

       MSHOME(1) current master browser = UNKNOWN

            LACIE5BIG 40809a03 (fvdw-sl NAS)

[2016/01/16 16:52:52, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282)

  dump_workgroups()

   dump workgroup on subnet    192.168.1.41: netmask=  255.255.255.0:

       MSHOME(1) current master browser = UNKNOWN

            LACIE5BIG 40809a03 (fvdw-sl NAS)

[2016/01/16 17:38:51, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282)

  dump_workgroups()

   dump workgroup on subnet    192.168.1.41: netmask=  255.255.255.0:

       MSHOME(1) current master browser = UNKNOWN

            LACIE5BIG 40809a03 (fvdw-sl NAS)

[2016/01/16 20:38:08, 0] nmbd/nmbd_workgroupdb.c:dump_workgroups(282)

  dump_workgroups()

   dump workgroup on subnet    192.168.1.41: netmask=  255.255.255.0:

       MSHOME(1) current master browser = UNKNOWN

            LACIE5BIG 40809a03 (fvdw-sl NAS)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 140 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9, 10  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group