5-Big Network 2 unable to update software and RAID problems

Post Reply
rob582
Posts: 1
Joined: Sat Nov 26, 2016 3:25 pm

5-Big Network 2 unable to update software and RAID problems

Post by rob582 » Sat Nov 26, 2016 3:45 pm

Hi,

I have a unit that has 5 brand new 2TB disks in it.

Current software version is 2.2.3. I have attempted to upgrade to 2.2.9.3 and 2.2.12.2 but the upgrade always fails.

Secondly the unit will only work with one disk, no raid as a 1.8TB unit. Every time I try to add the other disks the RAID does not make sense in terms of size. With all 5 disks, in a raid 5 configuration, it gives me just over 1TB of storage with about 800GB free. With 2-4 disks it gives me just over 251 MB and no free space.

I have tried the Auto raid and manual raid options. I have blanked the disks 2-5 completely as per instructions.

I have the model that cannot be booted without a disk.

Any advice on this would be very helpful.

Thanks.
You do not have the required permissions to view the files attached to this post.

Post Reply