General NAS-Central Forums

Welcome to the NAS community
It is currently Mon Nov 20, 2017 6:56 pm

All times are UTC




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Restore Debian
PostPosted: Mon Mar 14, 2016 9:06 pm 
Offline

Joined: Wed Oct 03, 2012 12:45 pm
Posts: 5
Hi
After some years with my nas running OMV, I've decided some time ago to give a refresh on it, installed wheezy and the new OMV 2.xx, it
took me some time to make all work, but the result was great.

Now after more or less two months running OMV, yesterday I suddenly lost access to it, I noticed them that after rebooting it, I could acess it
for more or less two minutes before it crashes again.

So today, I've tried it again, and today I didn't got any access at all on the network, so I hooked up my HMN-CE to my ttl cable, and o got the log that follows.

Can anyone help me to restore my device without making a new install? I Already tried a FSCK on the HD on my pc, but it didn't made any difference.

Thank you.

    Stage-1 Bootloader Mon Feb 7 16:35:00 MST 2011
    Attempting to set PLLA to 600MHz ...
    plla_ctrl0 : 0x0000021A
    plla_ctrl1 : 0x00480000
    plla_ctrl2 : 0x008F008B
    plla_ctrl3 : 0x00000154
    PLLA Set

    Setup memory, testing
    Reading disk 0, Image 0
    Sector : 0x0000009A
    Hdr len: 0x0001873C
    Hdr CRC: 0x9C321E55
    OK
    Initialising disks
    SATA PHY not ready for device 1
    Detecting SATA busses:
    Bus 0: Found first device OK
    Device 0: Model: ST31000520AS Firm: CC38 Ser#: 5VX1EFFJ
    Type: Hard Disk
    Capacity: 131071.9 MB = 127.9 GB (268435455 x 512)
    Device 1: not available
    Environment successfully read from disk 0 primary image


    U-Boot 1.1.2 (Sep 8 2012 - 10:03:04)

    U-Boot code: 60D00000 -> 60D1873C BSS: -> 60D1C3CC
    RAM Configuration:
    Bank #0: 60000000 256 MB
    SRAM Configuration:
    64KB at 0x50000000
    In: serial
    Out: serial
    Err: serial
    Setting Linux mem= boot arg value

    IDE read: device 0 block # 288, count 1 ... 1 blocks read: OK
    Hit any key to stop autoboot: 0

    IDE device 0: Model: ST31000520AS Firm: CC38 Ser#: 5VX1EFFJ
    Type: Hard Disk
    Capacity: 131071.9 MB = 127.9 GB (268435455 x 512)
    ... is now current device

    IDE read: device 0 block # 1290, count 6144 ... 6144 blocks read: OK

    IDE read: device 0 block # 16674, count 6144 ... 6144 blocks read: OK
    ## Booting image at 60500000 ...
    Image Name: Linux-3.12.6
    Image Type: ARM Linux Kernel Image (uncompressed)
    Data Size: 2982328 Bytes = 2.8 MB
    Load Address: 60008000
    Entry Point: 60008000
    Verifying Checksum ... OK
    OK
    ## Loading Ramdisk Image at 61000000 ...
    Image Name:
    Image Type: ARM Linux RAMDisk Image (gzip compressed)
    Data Size: 3073589 Bytes = 2.9 MB
    Load Address: 00000000
    Entry Point: 00000000
    Verifying Checksum ... OK

    Starting kernel ...

    Uncompressing Linux... done, booting the kernel.
    [ 0.000000] Booting Linux on physical CPU 0x0
    [ 0.000000] Linux version 3.12.6_OXNAS+ (root@PogoplugPro) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Sun Jan 12 08:07:56 CST 2014
    [ 0.000000] CPU: ARMv6-compatible processor [410fb025] revision 5 (ARMv7), cr=00c5387d
    [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
    [ 0.000000] Machine: PLXTECH NAS782X SoC (Flattened Device Tree), model: Iomega Home Media Network Hard Drive, Cloud Edition
    [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
    [ 0.000000] DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map
    [ 0.000000] PERCPU: Embedded 7 pages/cpu @c07b7000 s6464 r8192 d14016 u32768
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
    [ 0.000000] Kernel command line: root=/dev/sda1 console=ttyS0,115200 elevator=cfq mem=256M poweroutage=yes mac_adr=0x00,0xd0,0xb8,0x11,0x9f,0x4a
    [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [ 0.000000] Memory: 250960K/262144K available (4149K kernel code, 208K rwdata, 1068K rodata, 150K init, 208K bss, 11184K reserved)
    [ 0.000000] Virtual kernel memory layout:
    [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
    [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
    [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
    [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
    [ 0.000000] .text : 0xc0008000 - 0xc05206f4 (5218 kB)
    [ 0.000000] .init : 0xc0521000 - 0xc0546940 ( 151 kB)
    [ 0.000000] .data : 0xc0548000 - 0xc057c020 ( 209 kB)
    [ 0.000000] .bss : 0xc057c028 - 0xc05b0158 ( 209 kB)
    [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Hierarchical RCU implementation.
    [ 0.000000] NR_IRQS:160
    [ 0.000000] sched_clock: 24 bits at 390kHz, resolution 2560ns, wraps every 42949ms
    [ 0.000000] Console: colour dummy device 80x30
    [ 0.000271] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)
    [ 0.069939] pid_max: default: 32768 minimum: 301
    [ 0.070272] Mount-cache hash table entries: 512
    [ 0.071672] CPU: Testing write buffer coherency: ok
    [ 0.072215] Setting up static identity map for 0xc03f3338 - 0xc03f3370
    [ 0.074099] CPU1: Booted secondary processor
    [ 0.140165] Brought up 2 CPUs
    [ 0.140200] SMP: Total of 2 processors activated.
    [ 0.141754] devtmpfs: initialized
    [ 0.145738] pinctrl core: initialized pinctrl subsystem
    [ 0.146229] NET: Registered protocol family 16
    [ 0.146936] DMA: preallocated 256 KiB pool for atomic coherent allocations
    [ 0.150896] gpio-oxnas 44000000.gpio: at address d0846000
    [ 0.151198] gpio-oxnas 44100000.gpio: at address d0848000
    [ 0.151930] pinctrl-oxnas pinctrl.5: initialized OX820 pinctrl driver
    [ 0.159162] bio: create slab <bio-0> at 0
    [ 0.160488] vgaarb: loaded
    [ 0.160990] SCSI subsystem initialized
    [ 0.161904] usbcore: registered new interface driver usbfs
    [ 0.162014] usbcore: registered new interface driver hub
    [ 0.162306] usbcore: registered new device driver usb
    [ 0.162490] pps_core: LinuxPPS API ver. 1 registered
    [ 0.162511] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [ 0.162557] PTP clock support registered
    [ 0.165414] Switched to clocksource rps_clocksource_timer
    [ 0.166471] cfg80211: Calling CRDA to update world regulatory domain
    [ 0.181478] NET: Registered protocol family 2
    [ 0.182484] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
    [ 0.182574] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [ 0.182648] TCP: Hash tables configured (established 2048 bind 2048)
    [ 0.182755] TCP: reno registered
    [ 0.182789] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.182842] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [ 0.183290] NET: Registered protocol family 1
    [ 0.183741] Unpacking initramfs...
    [ 0.638100] Freeing initrd memory: 2996K (c1001000 - c12ee000)
    [ 0.668520] fuse init (API version 7.22)
    [ 0.669386] msgmni has been set to 496
    [ 0.672087] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.672115] io scheduler noop registered
    [ 0.672130] io scheduler deadline registered
    [ 0.672481] io scheduler cfq registered (default)
    [ 0.672977] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
    [ 0.674457] 44200000.uart: ttyS0 at MMIO 0x44200000 (irq = 55, base_baud = 390625) is a 16550A
    [ 1.097456] console [ttyS0] enabled
    [ 1.102899] scsi0 : sata_oxnas
    [ 1.106362] ata1: SATA max UDMA/133 irq 50
    [ 1.110553] ox820sata: reseting SATA core
    [ 1.111938] stmmac - user ID: 0x12, Synopsys ID: 0x35
    [ 1.111943] Ring mode enabled
    [ 1.111953] DMA HW capability register supported
    [ 1.111953] Enhanced/Alternate descriptors
    [ 1.111956] Enabled extended descriptors
    [ 1.111961] RX Checksum Offload Engine supported (type 2)
    [ 1.111964] TX Checksum insertion supported
    [ 1.111966] Wake-Up On Lan supported
    [ 1.111971] Enable RX Mitigation via HW Watchdog Timer
    [ 1.180864] libphy: stmmac: probed
    [ 1.184350] eth0: PHY ID 001cc914 at 0 IRQ 0 (stmmac-0:00) active
    [ 1.190430] eth0: PHY ID 001cc914 at 2 IRQ 0 (stmmac-0:02)
    [ 1.196014] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.202519] ehci-pci: EHCI PCI platform driver
    [ 1.207513] oxnas-ehci 40200100.ehci: EHCI Host Controller
    [ 1.213022] oxnas-ehci 40200100.ehci: new USB bus registered, assigned bus number 1
    [ 1.220830] oxnas-ehci 40200100.ehci: irq 39, io mem 0x40200100
    [ 1.244270] oxnas-ehci 40200100.ehci: USB 2.0 started, EHCI 1.00
    [ 1.250693] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [ 1.257518] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [ 1.264732] usb usb1: Product: EHCI Host Controller
    [ 1.269591] usb usb1: Manufacturer: Linux 3.12.6_OXNAS+ ehci_hcd
    [ 1.275589] usb usb1: SerialNumber: 40200100.ehci
    [ 1.281213] hub 1-0:1.0: USB hub found
    [ 1.285122] hub 1-0:1.0: 2 ports detected
    [ 1.289886] usbcore: registered new interface driver usb-storage
    [ 1.296660] input: gpio-keys.6 as /devices/gpio-keys.6/input/input0
    [ 1.304995] usbcore: registered new interface driver usbhid
    [ 1.310548] usbhid: USB HID core driver
    [ 1.314782] TCP: cubic registered
    [ 1.319500] NET: Registered protocol family 10
    [ 1.325662] sit: IPv6 over IPv4 tunneling driver
    [ 1.332433] ip6_gre: GRE over IPv6 tunneling driver
    [ 1.338388] NET: Registered protocol family 17
    [ 1.669977] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 1.677388] ata1.00: ATA-8: ST31000520AS, CC38, max UDMA/133
    [ 1.683077] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 0/32)
    [ 1.691187] ata1.00: configured for UDMA/133
    [ 1.696186] scsi 0:0:0:0: Direct-Access ATA ST31000520AS CC38 PQ: 0 ANSI: 5
    [ 1.705694] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.713950] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.719109] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.802984] sda: sda1 sda2
    [ 1.808358] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.813263] Freeing unused kernel memory: 148K (c0521000 - c0546000)
    Loading, please wait...
    [ 1.966617] udevd[65]: starting version 175
    Begin: Loading essential drivers ... [ 3.023557] md: raid0 personality registered for level 0
    [ 3.048875] md: raid1 personality registered for level 1
    [ 3.073720] md: linear personality registered for level -1
    [ 3.119889] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
    [ 3.149798] md: raid10 personality registered for level 10
    [ 3.159080] xor: measuring software checksum speed
    [ 3.259929] arm4regs : 831.200 MB/sec
    [ 3.359925] 8regs : 421.200 MB/sec
    [ 3.459927] 32regs : 513.200 MB/sec
    [ 3.464092] xor: using function: arm4regs (831.200 MB/sec)
    [ 3.642009] raid6: int32x1 28 MB/s
    [ 3.809991] raid6: int32x2 50 MB/s
    [ 3.980044] raid6: int32x4 48 MB/s
    [ 4.150702] raid6: int32x8 49 MB/s
    [ 4.154465] raid6: using algorithm int32x2 (50 MB/s)
    [ 4.159411] raid6: using intx1 recovery algorithm
    [ 4.179056] md: raid6 personality registered for level 6
    [ 4.184445] md: raid5 personality registered for level 5
    [ 4.189736] md: raid4 personality registered for level 4
    [ 4.196986] device-mapper: raid: Loading target version 1.5.2
    done.
    Begin: Running /scripts/init-premount ... done.
    Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... mdadm: No arrays found in config file or automatically
    Failure: failed to assemble all arrays.
    done.
    done.
    Begin: Running /scripts/local-premount ... done.
    [ 10.737466] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [ 10.748408] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
    [ 10.782830] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    Found bootable rootfs in /dev/sda1
    [ 10.823877] EXT2-fs (sda1): error: couldn't mount because of unsupported optional features (240)
    [ 10.834652] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
    [ 10.850718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    System will boot from usb driver: /dev/sda1
    Begin: Running /scripts/local-bottom ... done.
    done.
    Begin: Running /scripts/init-bottom ... done.
    INIT: version 2.88 booting
    Using makefile-style concurrent boot in runlevel S.
    Starting the hotplug events dispatcher: udevd[ 13.551644] udevd[285]: starting version 175
    .
    Synthesizing the initial hotplug events...done.
    Waiting for /dev to be fully populated...done.
    Setting parameters of disc: (none).
    Setting preliminary keymap...done.
    Activating swap...done.
    [ 19.102223] EXT4-fs (sda1): re-mounted. Opts: (null)
    Cleaning up temporary files... /tmp.
    Assembling MD arrays...done (no arrays found in config file or automatically).
    Setting up LVM Volume Groups... No volume groups found
    No volume groups found
    done.
    Activating lvm and md swap...done.
    Checking file systems...fsck from util-linux 2.20.1
    /dev/sda2: recovering journal
    /dev/sda2: clean, 735/60522496 files, 63248002/242085120 blocks
    done.
    ^CMounting local filesystems...[ 28.199193] EXT4-fs (sda2): acl option not supported
    [ 28.536716] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: user_xattr,acl
    ^Cntfs-3g: Failed to access volume '/dev/disk/by-uuid/5CE8F644E8F61C48': No such file or directory

    ntfs-3g 2012.1.15AR.5 external FUSE 29 - Third Generation NTFS Driver
    Configuration type 7, XATTRS are on, POSIX ACLS are on

    Copyright (C) 2005-2007 Yura Pakhuchiy
    Copyright (C) 2006-2009 Szabolcs Szakacsits
    Copyright (C) 2007-2011 Jean-Pierre Andre
    Copyright (C) 2009 Erik Larsson

    Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>

    Options: ro (read-only mount), remove_hiberfile, uid=, gid=,
    umask=, fmask=, dmask=, streams_interface=.
    Please see the details in the manual (type: man ntfs-3g).

    Example: ntfs-3g /dev/sda1 /mnt/windows

    News, support and information: http://tuxera.com
    ntfs-3g: Failed to access volume '/dev/disk/by-uuid/285C9F3A5C9F022C': No such file or directory

    ntfs-3g 2012.1.15AR.5 external FUSE 29 - Third Generation NTFS Driver
    Configuration type 7, XATTRS are on, POSIX ACLS are on

    Copyright (C) 2005-2007 Yura Pakhuchiy
    Copyright (C) 2006-2009 Szabolcs Szakacsits
    Copyright (C) 2007-2011 Jean-Pierre Andre
    Copyright (C) 2009 Erik Larsson

    Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>

    Options: ro (read-only mount), remove_hiberfile, uid=, gid=,
    umask=, fmask=, dmask=, streams_interface=.
    Please see the details in the manual (type: man ntfs-3g).

    Example: ntfs-3g /dev/sda1 /mnt/windows

    News, support and information: http://tuxera.com
    failed.
    Activating swapfile swap...done.
    [ 80.110008] ox820sata: reseting SATA core
    [ 80.470013] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [ 80.477048] ata1.00: failed command: READ DMA
    [ 80.481448] ata1.00: cmd c8/00:88:80:ac:5a/00:00:00:00:00/e0 tag 0 dma 69632 in
    [ 80.481448] res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [ 80.496102] ata1.00: status: { DRDY }
    [ 80.499773] ata1: hard resetting link
    [ 81.010022] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 81.117099] ox820sata: reseting SATA core
    [ 81.469987] ox820sata: reseting SATA core
    [ 81.831825] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 81.837908] ata1.00: revalidation failed (errno=-5)
    [ 86.119992] ata1: hard resetting link
    [ 86.630013] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 86.737075] ox820sata: reseting SATA core
    [ 87.089999] ox820sata: reseting SATA core
    [ 87.449996] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 87.456074] ata1.00: revalidation failed (errno=-5)
    [ 91.740016] ata1: hard resetting link
    [ 92.250017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 92.357081] ox820sata: reseting SATA core
    [ 92.710074] ox820sata: reseting SATA core
    [ 93.070010] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 93.076093] ata1.00: revalidation failed (errno=-5)
    [ 93.080988] ata1.00: disabled
    [ 93.084037] ata1.00: device reported invalid CHS sector 0
    [ 93.089428] ox820sata: reseting SATA core
    [ 93.103736] ata1: exception Emask 0x10 SAct 0x0 SErr 0x20000 action 0xe frozen t4
    [ 93.111211] ata1: SError: { PHYInt }
    [ 93.114805] ata1: hard resetting link
    [ 94.020006] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 94.127096] ox820sata: reseting SATA core
    [ 94.480007] ox820sata: reseting SATA core
    [ 94.840074] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 99.129996] ata1: hard resetting link
    [ 99.640020] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 99.747082] ox820sata: reseting SATA core
    [ 100.099996] ox820sata: reseting SATA core
    [ 100.460003] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 104.750110] ata1: hard resetting link
    [ 105.260032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 105.367096] ox820sata: reseting SATA core
    [ 105.719994] ox820sata: reseting SATA core
    [ 106.080012] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x1)
    [ 110.370019] ata1: hard resetting link
    [ 110.880010] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [ 110.886228] sd 0:0:0:0: [sda]
    [ 110.889356] Result: hostbyte=0x00 driverbyte=0x08
    [ 110.894080] sd 0:0:0:0: [sda]
    [ 110.897208] Sense Key : 0xb [current] [descriptor]
    [ 110.902010] Descriptor sense data with sense descriptors (in hex):
    [ 110.908160] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
    [ 110.914577] 00 00 00 00
    [ 110.917839] sd 0:0:0:0: [sda]
    [ 110.920993] ASC=0x0 ASCQ=0x0
    [ 110.923868] sd 0:0:0:0: [sda] CDB:
    [ 110.927347] cdb[0]=0x28: 28 00 00 5a ac 80 00 00 88 00
    [ 110.932602] end_request: I/O error, dev sda, sector 5942400
    [ 110.938255] sd 0:0:0:0: rejecting I/O to offline device
    [ 110.943480] sd 0:0:0:0: [sda] killing request
    [ 110.947942] sd 0:0:0:0: [sda] Unhandled error code
    [ 110.949450] sd 0:0:0:0: rejecting I/O to offline device
    [ 110.957987] sd 0:0:0:0: [sda]
    [ 110.961141] Result: hostbyte=0x01 driverbyte=0x00
    [ 110.965831] sd 0:0:0:0: [sda] CDB:
    [ 110.969305] cdb[0]=0x2aBus error
    : 2a 00 00 85 01 58 00 00 10 00
    [ 110.975554] end_request: I/O error, dev sda, sector 8716632
    [ 110.981283] sd 0:0:0:0: rejecting I/O to offline device
    [ 110.981312] Aborting journal on device sda1-8.
    [ 110.990929] EXT4-fs warning (device sda1): ext4_end_bio:316: I/O error writing to inode 141775 (offset 0 size 0 starting block 617473)
    [ 111.002972] Buffer I/O error on device sda1, logical block 609280
    [ 111.009085] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.014328] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.019563] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.024798] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.030028] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.035366] ata1: EH complete
    [ 111.035432] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.035489] JBD2: Error -5 detected when updating journal superblock for sda1-8.
    [ 111.035537] EXT4-fs error (device sda1) in ext4_reserve_inode_write:4842: Journal has aborted
    [ 111.035630] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.035686] EXT4-fs error (device sda1) in ext4_dirty_inode:4961: Journal has aborted
    [ 111.035694] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 111.035740] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.035791] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 111.035832] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.035873] EXT4-fs error (device sda1): ext4_journal_check_start:56: Detected aborted journal
    [ 111.035880] EXT4-fs (sda1): Remounting filesystem read-only
    [ 111.035888] EXT4-fs (sda1): previous I/O error to superblock detected
    [ 111.035927] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.121320] ata1.00: detaching (SCSI 0:0:0:0)
    [ 111.124311] sd 0:0:0:0: rejecting I/O to offline device
    [ 111.125025] sd 0:0:0:0: rejecting I/O to offline device
    Bus error
    [ 111.137536] end_request: I/O error, dev sda, sector 0
    /etc/init.d/mountall.sh: 65: /etc/init.d/mountall.sh: df: Input/output error
    [ 111.166397] EXT4-fs (sda1): previous I/O error to superblock detected
    /etc/init.d/mountall.sh: 12: /etc/init.d/mountall.sh: [ 111.189163] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 111.194795] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #402267: comm net.agent: reading directory lblock 0
    [ 111.206704] sd 0:0:0:0: [sda]
    [ 111.208128] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #402267: comm net.agent: reading directory lblock 0
    [ 111.208212] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #13: comm bootlogd: reading directory lblock 0
    ls: Input/output[ 111.231180] Result: hostbyte=0x04 driverbyte=0x00
    [ 111.231480] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393332: comm net.agent: reading directory lblock 0
    [ 111.231723] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393217: comm net.agent: reading directory lblock 0
    [ 111.231941] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393450: comm net.agent: reading directory lblock 0
    [ 111.232125] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393450: comm net.agent: reading directory lblock 0
    error
    /etc/in[ 111.280496] sd 0:0:0:0: [sda] Stopping disk
    it.d/mountall.sh[ 111.286113] EXT4-fs (sda1): I/O error while writing superblock
    : 12: /etc/init.[ 111.293304] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #131075: comm mountall.sh: reading directory lblock 0
    d/mountall.sh: s[ 111.305825] sd 0:0:0:0: [sda] START_STOP FAILED
    ed: Input/output[ 111.311559] sd 0:0:0:0: [sda]
    [ 111.312616] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393332: comm net.agent: reading directory lblock 0
    [ 111.312865] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393217: comm net.agent: reading directory lblock 0
    error
    [ 111.337704] Result: hostbyte=0x04 driverbyte=0x00
    /etc/init.d/mountall.sh: 12: /etc/init.d/mountall.sh: grep: not found
    [ 111.361397] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393332: comm mountall.sh: reading directory lblock 0
    [ 111.372577] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393217: comm mountall.sh: reading directory lblock 0
    /etc/init.d/mountall.sh: 679: /etc/init.d/mounta[ 111.388922] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    ll.sh: uname: not found
    mountall-bootcle[ 111.406581] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    an.sh: No such file or directory[ 111.418616] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0

    openmediavault: No such file or [ 111.434147] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    directory
    procps: No such file or director[ 111.449374] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    y
    resolvconf: No such file or dire[ 111.464752] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    ctory
    udev-mtab: No such file or directory
    urandom: No such[ 111.483788] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    file or directory
    networking: No s[ 111.501058] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    uch file or directory
    rpcbind: No such[ 111.518208] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    file or directory
    nfs-common: No s[ 111.535754] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    uch file or directory
    mountnfs.sh: No [ 111.553180] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    such file or directory
    mountnfs-bootcle[ 111.570355] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    an.sh: No such file or directory[ 111.582558] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0

    bootmisc.sh: No such file or directory
    [ 111.601717] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0

    console-setup: No such file or d[ 111.617999] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    irectory
    [ 111.631214] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    quota: No such file or directory
    screen-cleanup: [ 111.649167] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #358: comm startpar: reading directory lblock 0
    No such file or directory
    stop-bootlogd-single: No such file or directory
    [ 111.674936] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393217: comm rc: reading directory lblock 0
    /etc/init.d/rc: 279: /etc/init.d/rc: /bin/echo: not found
    /etc/init.d/rc: 364: /etc/init.d/rc: /bin/echo: not found
    [ 111.698083] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #131675: comm init: reading directory lblock 0
    [ 111.708643] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #132847: comm init: reading directory lblock 0
    INIT: Entering runleve[ 111.721410] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #13: comm init: reading directory lblock 0
    l: 2
    [ 111.735377] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393217: comm init: reading directory lblock 0
    INIT: cannot execute "/etc/init.d/rc"
    [ 111.751498] EXT4-fs error (device sda1): ext4_find_entry:1309: inode #393332: comm init: reading directory lblock 0
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: cannot execute "/sbin/getty"
    INIT: Id "T0" respawning too fast: disabled for 5 minutes
    INIT: no more processes left in this runlevel
    ^A


Top
 Profile  
 
 Post subject: Re: Restore Debian
PostPosted: Tue Mar 15, 2016 8:41 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6072
Quote:
[ 110.932602] end_request: I/O error, dev sda, sector 5942400
Your disk is dead.


Top
 Profile  
 
 Post subject: Re: Restore Debian
PostPosted: Tue Mar 15, 2016 2:30 pm 
Offline

Joined: Wed Oct 03, 2012 12:45 pm
Posts: 5
I thought that disk may be the problem, but wasn`t sure about it, specially because I can acess all the data.
Will replace it them, thanks a lot.


Top
 Profile  
 
 Post subject: Re: Restore Debian
PostPosted: Tue Mar 15, 2016 3:13 pm 
Offline

Joined: Wed Oct 03, 2012 12:45 pm
Posts: 5
Just a small update, after a quick research on the HDD error, I've found someone telling me to try a dd if=/dev/sdX of=/dev/sdX
Did it at my pc, and now everything is working again.


Top
 Profile  
 
 Post subject: Re: Restore Debian
PostPosted: Tue Mar 15, 2016 7:23 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6072
I strongly advice you to have a look at the SMART status of the disk. (Unless the data on the NAS isn't important.) By writing each sector some problems can be covered for a while, but seeing the list of unreadable nodes/sectors I don't think the disk will have many spare sectors left.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group