LaCie LaPlug and WLAN configuration

Post Reply
Sellig
Posts: 2
Joined: Tue Feb 21, 2012 9:33 am

LaCie LaPlug and WLAN configuration

Post by Sellig » Tue Feb 21, 2012 9:52 am

Hello,

I have some troubles when I try to "connect" my LaPlug wirelessly under Win 7.
By using Ethernet cable there is no problem, all hard drives connected are accessible.

My Problem (sorry for my poor english):

In the dashboard “Wireless Client“, I can see my Wireless-Network, I can select it and type my WPA2-key and “Test the connection” -> Result “green light”.
Then I click the “Apply” button to make the connection, and then unplug the Ethernet cable.

After that, I’m not able to access to my connected hard drives (LaPlug) anymore.
In the “LaCie Network Assistant” I can see at first two LaPlug-devices and after a few seconds one Laplug-device with two MAC-addresses (I think one Ethernet, one WLAN-Wireless).

I noticed that the IP-Address from this “new” MAC-address is not in my Network-IP´s (Something like 172.20.0.1)…

Thank´s in advance for helping me,
Gilles

Sellig
Posts: 2
Joined: Tue Feb 21, 2012 9:33 am

Re: LaCie LaPlug and WLAN configuration

Post by Sellig » Wed Feb 22, 2012 8:14 am

Ok it work´s great now:
:P
new firmware update + LaCie Network Assistant update !!
Gilles

Post Reply