Problems connecting to cloudbox, error message

Post Reply
Olivier1980
Posts: 1
Joined: Wed Jan 30, 2013 6:58 am

Problems connecting to cloudbox, error message

Post by Olivier1980 » Wed Jan 30, 2013 5:08 pm

Hi,

I've connected my cloudbox to the network. When I go to My computer > network I see the cloudbox but when I wont to open it I get an error (see attachment). I've got this problem on my both PC's (windows vista and windows 7). I also have put off my firewall and virus-scanner but without result. They strange thing is that I can ping to the IP-adres of the cloudbox and I can access the dashboard. I also tried using the lacie network assist but that didn't help, here also I get an error that I can't access the lacie cloudbox.

I've been searching on the internet but up till now without results. Hope someone can help me out.

Thx.

Image
error_cloudbox.jpg
You do not have the required permissions to view the files attached to this post.

jeromem1976
Posts: 1
Joined: Wed Feb 27, 2013 12:00 pm

Re: Problems connecting to cloudbox, error message

Post by jeromem1976 » Wed Feb 27, 2013 3:13 pm

I have exactelly the same failure message.
System: PC Windows 7
But I can read files on my TV but
Do you have found the solution now?? thanks

User avatar
KillerDAN
Posts: 4
Joined: Sat Mar 16, 2013 11:09 am

Re: Problems connecting to cloudbox, error message

Post by KillerDAN » Sat Mar 16, 2013 11:21 am

What kind of switch/ network interface are you connecting to ?

My Cloudbox 3TB won't work properly with anything else than connected to a Gigabit switch, or direct cable to PC with Gigabit interface,

skagerrak
Posts: 1
Joined: Sun Mar 17, 2013 12:39 pm

Re: Problems connecting to cloudbox, error message

Post by skagerrak » Sun Mar 17, 2013 12:49 pm

Try this:

Connect the cloudbox to a computer, without using a router or a switch. (Iwas using win7)
Wate a while. Go to "Network" Wait until the "Lacie Cloudbox" is displayd. Right click on the Lacie Cloudbox and go for "Devices Website". Now you are connected to the dashboard.

In the dashboard you change to the network section and disable the automatic Port selection at the right bottom of this site. Normally It works than.

Good Luck

suts
Posts: 1
Joined: Sat Jan 03, 2015 8:27 pm

Re: Problems connecting to cloudbox, error message

Post by suts » Sat Jan 03, 2015 8:34 pm

I had the same problem. I searched for it on google and came here. The solution of disabling the automatic port selection worked. So, in the first place I just came here to thank you. :D

Although it is still weird that the dashboard was accessible while the cloudbox was still attached to a router. And other devices (such as mediaplayers) could still acces the cloudbox, my computer could not. The reason this feature of automatic port selection was enabled, was because I wanted to acces the cloudbox from an extern location. So I would like to ask you, how can I acces it from an extern location, without not being able to acces the cloudbox on my computer?

Thanks! :roll:

Post Reply