Install FW and test hardware on EZ Media & Backup Center 1TB

Post Reply
nicomartino
Posts: 6
Joined: Sun Feb 22, 2015 3:52 pm

Install FW and test hardware on EZ Media & Backup Center 1TB

Post by nicomartino » Sat Mar 07, 2015 8:26 pm

Hi everyone!!, First of all sorry for my english, I'm from Uruguay.

I have a Iomega EZ Media & Backup Center 1TB with a formated disk. To install the firmware I try:

1) follow de steps on viewtopic.php?f=279&t=8317 with no luck.

2) I have an clonezilla Image of another EZ Media & Backup Center 1TB. Using this image neither work (formus said that, but I try)

3) Using the clonezilla image and write de initrd and zImage neither work

The nas never read the pendrive. So reading de init script (mount_images.sh) i see that when the nas detect a usb device the power led must blink two times or power on in white color. This never hapends...

I power on and after 4 - 10 second the power led change to red and stay there do what I do... So I'm thinking could be a hardware problem

First of all I would like to test the hardware. How can I do it???


The part of the script mount_images.sh I mention is:

Code: Select all

# if reset button is pressed do usb imaging if no usb do network imaging
# else if reset button is not pressed then look for valid image in harddrive and 
# if not do usb imaging and if no usb drive do network imaging

if [ -f $RESET_BUTTON_FILE ] || [ $USB_RECOVERY_MODE == "0" ]
then
	# reset button was pressed
	rm -f $RESET_BUTTON_FILE

	echo "Checking if there is an attached EMC Imager"
	sleep 10

	mkdir -p /usb_drive
	mount $USB_DEVICE /usb_drive -t vfat -o async,rw,fmask=0000,dmask=0000,iocharset=utf8
	mount_ret=$?
	scriptret=0
	if [ $mount_ret -eq 0 ]
	then
		# Flash the system status LED to indicate USB imaging.
		echo 2 > /sys/class/nasled/pwr_white_led
		run_preimage_script
		scriptret=$?
		extract_validate_image
		validate_image=$?
	fi
	if [ "$scriptret" -eq "0" ]
Thanks everyone!!

skull
Posts: 1
Joined: Mon Mar 16, 2015 12:09 pm

Re: Install FW and test hardware on EZ Media & Backup Center

Post by skull » Mon Mar 16, 2015 12:11 pm

I have the same problem. Tested all USB stics and cardreaders. No effect...

ejbauza
Posts: 7
Joined: Thu Oct 09, 2014 2:42 pm

Re: Install FW and test hardware on EZ Media & Backup Center

Post by ejbauza » Mon Feb 22, 2016 11:07 pm

I'm having the same problem. Any idea?? Thanks!

Post Reply