General NAS-Central Forums

Welcome to the NAS community
It is currently Sat Mar 24, 2018 1:58 pm

All times are UTC

Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sun Sep 08, 2013 6:08 am 

Joined: Sat Sep 07, 2013 2:43 pm
Posts: 1
Hi Folks...This is my very first post on this PHBBS. All the way from Christchurch, New Zealand (NZL).

Regrettably, my recently purchased and second-hand, eTRAYz Xtreamer NAS won't boot! The previous owner had obviously been fiddling with it and now its a "brick." To de-brick it, I need to re-blow the firmware by using either Yamon or JTAG software and I need to get a copy of the eTRAYz PCB TTL com port pin-outs now already on the eTRAYz PCB.. The operation to do this will probably be exactly similar to many satellite receivers, phones and other software.firmware (usually Linux or variations of it such as, say, Android on cellphones though the pin-outs for each different device will be different). I'll just run a boot sector track on to it then re-install a Ubuntu or some other Linux version on to it and start modifying from there once I can get access to it. Presently, I can get NO access to it whatever despite having tried every trick known to me, man and dog.

I just need to plug a PC/Laptop USB lead into with a MAX232 chip converting from USB to TTL chip levels on to the TTL socket of the eTRAYz PCB if some kind soul already knows what the TTL COM port PCB pin connections are. No, just to get in ahead of any people anticipating the obvious answer, it's NOT at RS232C PC COM port protocol and voltage levels on that PCB eTRAYz COM port, it's probably it at TTL levels.... I need to access the Firmware directly.........

BTW, did these boxes have a known IP address or was it always Dynamic (DNS) addressing??
Love and light to all,
73's de Robert, ZL2ROB. Kia ora from New Zealand (a Maori hello greeting).

PostPosted: Sun Sep 08, 2013 12:45 pm 

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6185
Your Xtreamer has an Oxnas810 SoC, so there might be an easier way: viewtopic.php?f=235&t=5183

Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC

Who is online

Users browsing this forum: No registered users and 2 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group