Thanks your reply.
After "reload-etrayz.sh /dev/sdc1" looks like hdd read/write a couple of seconds at insmod command and etrayzs usb led start blinking and stay unresponsive...
Is that correct usb device ? Look at my remarks earlier...
Usb stick ext3 formatted with debian-6.07-armel rootfs with udev from lenny
my boot dir files:
initrd (empty file)
zImage (extracted from uImage: dd if=uImage of=zImage bs=64 skip=1)
The zImage is in the arch compile tree as a separate image, no extraction from uImage.
What compile chain are you using ?
Im a bit lost.
Are you using etrayz kernel (uImage) and its modules as is, copied on usb stick?
A custom kernel with no cmdline? or a custom kernel with the same cmd line from etrayzs /proc/cmdline?
Using the zImage, reloaded.ko and reload.sh, I uploaded and 220.127.116.11 kernel modules from the compilation. I only included the usb drivers in my compiled kernel...
Thats it, maybe experiment some more... goodluck !