General NAS-Central Forums

Welcome to the NAS community
It is currently Mon Jul 24, 2017 8:38 pm

All times are UTC




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Medion Life P89634
PostPosted: Mon Jan 06, 2014 9:02 pm 
Offline

Joined: Mon Jan 06, 2014 8:59 pm
Posts: 4
Hi everyone !

Can anyone tell me if the Medion Life P89634 NAS (2 x 2 Tb) is in fact a Zyxel and what its specifications are ?

Greetz,

Bart


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 8:37 am 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6015
Do you have one? The box looks like a doubled NSA-212. But of course the content can be totally different.
Some brief specifications are here: http://www.medion.com/de/prod/MEDION®+LIFE+P89634+2+x+2+TB+Dual+Bay+NAS+server/50046259A1

If the box is a sibling of a ZyXEL, you can try to get Telnet access, Telnet backdoor, to find out more specific details.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 7:15 pm 
Offline

Joined: Mon Jan 06, 2014 8:59 pm
Posts: 4
I bought it a couple of days ago here at the ALDI store for 249 €.
Already tried the FFP stick. No success so far.

Can't find any info anywhere for now in regarding if it's a Zyxel or something else.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 8:36 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6015
No, the FFP stick won't work without a small change change. Each type of hardware has it's own checkfile, for the single disk Medion it's STG212_check_file. If the box supports usb_key_func.sh, you'll have to guess how the file should be called (STG222_check_file or STG223_check_file might be a good guess), or have a look in the firmware. To get access to the firmware you either have to have telnet or ssh access, or firmware (update) file from Medion/Aldi.

Did you already try the Telnet backdoor?


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 9:15 pm 
Offline

Joined: Mon Jan 06, 2014 8:59 pm
Posts: 4
It appears that the new Medion NAS uses the HipServ OS from Axentra.

It's very easy to get root access on them apparently.
They use a login like: username_hipserv_medion_serial number

I was able to do a dmesg and found out they use the Feroceon 88FR131 CPU and the hdd are Seagate ST2000DM001-1CH1.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 9:30 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6015
Medion is a strange brand, isn't it? This is the 4th NAS distro in 3 years.

Anyway, for the record, can you post some info like
Code:
cat /proc/cpuinfo
cat /proc/meminfo
cat /proc/mtd
cat /proc/cmdline
uname -a
cat /proc/mounts
dmesg
It seems you are the first one to give a hardware description.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Tue Jan 07, 2014 9:52 pm 
Offline

Joined: Mon Jan 06, 2014 8:59 pm
Posts: 4
Yeah Medion indeed is a strange brand ;)

Code:
-bash-3.2$ cat /proc/cpuinfo

Processor       : Feroceon 88FR131 rev 1 (v5l)
BogoMIPS        : 999.42
Features        : swp half thumb fastmult edsp
CPU implementer : 0x56
CPU architecture: 5TE
CPU variant     : 0x2
CPU part        : 0x131
CPU revision    : 1

Hardware        : Feroceon-KW
Revision        : 0000
Serial          : 0000000000000000


Code:
-bash-3.2$ cat /proc/meminfo

MemTotal:         248644 kB
MemFree:           28072 kB
Buffers:            9616 kB
Cached:           159796 kB
SwapCached:            0 kB
Active:            95848 kB
Inactive:         102324 kB
Active(anon):      30628 kB
Inactive(anon):        0 kB
Active(file):      65220 kB
Inactive(file):   102324 kB
Unevictable:           0 kB
Mlocked:               0 kB
SwapTotal:        511992 kB
SwapFree:         511992 kB
Dirty:                 8 kB
Writeback:             0 kB
AnonPages:         28772 kB
Mapped:            19416 kB
Slab:              17368 kB
SReclaimable:       4564 kB
SUnreclaim:        12804 kB
PageTables:         1028 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      636312 kB
Committed_AS:     247868 kB
VmallocTotal:     385024 kB
VmallocUsed:        1464 kB
VmallocChunk:     382560 kB


Code:
-bash-3.2$ cat /proc/mtd

dev:    size   erasesize  name
mtd0: 00100000 00020000 "u-boot"
mtd1: 00600000 00020000 "uImage"
mtd2: 0f900000 00020000 "rootfs"


Code:
-bash-3.2$ cat /proc/cmdline

console=ttyS0,115200 ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc


Code:
-bash-3.2$ uname -a

Linux axentraserver.******.lifecloudmedion.com 2.6.31.8 #97 Thu Sep 12 10:38:00 EDT 2013 armv5tel armv5tel armv5tel GNU/Linux


Code:
-bash-3.2$ cat /proc/mounts

rootfs / rootfs rw 0 0
ubi0:rootfs / ubifs rw,relatime 0 0
/proc /proc proc rw,relatime 0 0
/sys /sys sysfs rw,relatime 0 0
/proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0
none /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
nodev /var/log tmpfs rw,relatime 0 0
nodev /mnt/tmpfs tmpfs rw,relatime 0 0
nodev /var/lib/php/session tmpfs rw,relatime 0 0
nodev /tmp tmpfs rw,relatime 0 0
nodev /var/run tmpfs rw,relatime 0 0
nodev /var/cache tmpfs rw,relatime 0 0
nodev /var/lib/axentra_sync tmpfs rw,relatime 0 0
nodev /var/lib/oe-admin/minions tmpfs rw,relatime 0 0
nodev /var/lib/oe-admin/actions tmpfs rw,relatime 0 0
nodev /var/lib/oe-update-checker tmpfs rw,relatime 0 0
nodev /etc/blkid tmpfs rw,relatime 0 0
nodev /var/lib/dbus tmpfs rw,relatime 0 0
nodev /var/lib/dhclient tmpfs rw,relatime 0 0
nodev /var/lock tmpfs rw,relatime 0 0
nodev /var/spool tmpfs rw,relatime 0 0
nodev /var/lib/avahi-autoipd tmpfs rw,relatime 0 0
nodev /etc/dhclient-eth0.conf tmpfs rw,relatime 0 0
nodev /etc/printcap tmpfs rw,relatime 0 0
nodev /etc/resolv.conf tmpfs rw,relatime 0 0
/dev/md0 /mnt/disk1 ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/sdb1 /mnt/disk2 ext4 rw,relatime,barrier=1,data=ordered 0 0
none /home aufs rw,relatime,si=ec0ed7f0,noplink,create=mfs,sum 0 0
none /tmp aufs rw,relatime,si=ec0ed7f0,noplink,create=mfs,sum 0 0
none /var/cache/mt-daapd aufs rw,relatime,si=ec0ed7f0,noplink,create=mfs,sum 0 0
none /home/0torrents aufs rw,relatime,si=ec0ed7f0,noplink,create=mfs,sum 0 0


Code:
Linux version 2.6.31.8 (mostafah@es5x86.axentra.com) (gcc version 4.3.2 (sdk3.3-ct-ng-1.4.1) ) #97 Thu Sep 12 10:38:00 EDT 2013
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Feroceon-KW
Using UBoot passing parameters structure
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c0595648, node_mem_map c05b3000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65024 pages, LIFO batch:15
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
Kernel command line: console=ttyS0,115200 ubi.mtd=2,2048 root=ubi0:rootfs rootfstype=ubifs init=/linuxrc
PID hash table entries: 1024 (order: 10, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 256MB = 256MB total
Memory: 247680KB available (4784K code, 283K data, 724K init, 0K highmem)
Hierarchical RCU implementation.
NR_IRQS:128
Console: colour dummy device 80x30
Calibrating delay loop... 999.42 BogoMIPS (lpj=4997120)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Feroceon L2: Enabling L2
Feroceon L2: Cache support initialised.
[BlueDBG] mvBoardIdGet()= 0x<NULL>

CPU Interface
-------------
SDRAM_CS0 ....base 00000000, size 256MB
SDRAM_CS1 ....disable
SDRAM_CS2 ....disable
SDRAM_CS3 ....disable
PEX0_MEM ....base e0000000, size 128MB
PEX0_IO ....base f2000000, size   1MB
PEX1_MEM ....no such
PEX1_IO ....no such
INTER_REGS ....base f1000000, size   1MB
NFLASH_CS ....base fa000000, size   2MB
SPI_CS ....base f4000000, size  16MB
BOOT_ROM_CS ....no such
DEV_BOOTCS ....no such
CRYPT_ENG ....base f0000000, size   2MB

  Marvell Development Board (LSP Version KW_LSP_5.1.3_patch30)-- DB6702A-GMtech                                                                                                                       Soc: 88F6702 A1 LE

 Detected Tclk 166666667 and SysClk 400000000
MV Buttons Device Load
btns_init_data - DB 6702A
btns_init_data - Number of configured buttons: 2
Marvell USB EHCI Host controller #0: c8040740
PEX0 interface detected Link X1
pci 0000:00:01.0: reg 10 64bit mmio: [0x90000000-0x90007fff]
PCI: bus0: Fast back to back transfers disabled
mvPexLocalBusNumSet: ERR. Invalid PEX interface 1
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
RTC has been updated!!!
rtc mv_rtc: rtc core: registered kw-rtc as rtc0
RTC registered
cpufreq: Init kirkwood cpufreq driver
cpufreq: High frequency: 1000000KHz - Low frequency: 400000KHz
cpufreq: Setting CPU Frequency to 1000000 KHz
cpufreq: Setting PowerSaveState to off
XOR registered 4 channels
XOR 2nd invalidate WA enabled
cesadev_init(c000e0a8)
mvCesaInit: sessions=640, queue=64, pSram=f0000000
Warning: TS unit is powered off.
MV Buttons Driver Load
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 484
alg: No test for cipher_null (cipher_null-generic)
alg: No test for ecb(cipher_null) (ecb-cipher_null)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for stdrng (krng)
alg: No test for hmac(digest_null) (hmac(digest_null-generic))
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered (default)
Initializing ths8200_init
Initializing dove_adi9889_init
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012100 (irq = 34) is a 16550A
console [ttyS0] enabled
Integrated Sata device found
IRQ 21/mvSata: IRQF_DISABLED is not guaranteed on shared IRQs
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
scsi 0:0:0:0: Direct-Access     Seagate  ST2000DM001-1CH1 CC47 PQ: 0 ANSI: 5
scsi 1:0:0:0: Direct-Access     Seagate  ST2000DM001-1CH1 CC47 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 0:0:0:0: [sda] 0-byte physical blocks
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] 0-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FU                                                                                                                     A
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 23 00 10 00
Loading Marvell Ethernet Driver:
  o Cached descriptors in DRAM
  o DRAM SW cache-coherency
  o 1 Giga ports supported
  o Single RX Queue support - ETH_DEF_RXQ=0
  o Single TX Queue support - ETH_DEF_TXQ=0
  o TCP segmentation offload (TSO) supported
  o Large Receive offload (LRO) supported
  o Receive checksum offload supported
  o Transmit checksum offload supported
  o Network Fast Processing (Routing) supported - (Disabled)
  o Driver ERROR statistics enabled
  o Proc tool API enabled
  o SKB Reuse supported - (Disabled)
  o SKB Recycle supported - (Disabled)
  o Rx descripors: q0=128
  o Tx descripors: q0=532
  o Loading network interface(s):
     o register under mv88fx_eth platform
 sda:     o eth0, ifindex = 2, GbE port = 0

mvFpRuleDb (c873a000): 2048 entries, 8192 bytes
Counter=0, opIdx=6, overhead=16
Counter=1, opIdx=2, overhead=0
Counter=2, opIdx=1, overhead=18
Counter=3, opIdx=2, overhead=0
Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
Copyright (c) 1999-2006 Intel Corporation.
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FU                                                                                                                     A
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
 sdb:Using Hamming 1-bit ECC for NAND device
NAND device: Manufacturer ID: 0xc8, Chip ID: 0xda (Zentel NAND 256MiB 3,3V 8-bit                                                                                                                     )
Scanning device for bad blocks
Using static partition definition
Creating 3 MTD partitions on "nand_mtd":
0x000000000000-0x000000100000 : "u-boot"
0x000000100000-0x000000700000 : "uImage"
0x000000700000-0x000010000000 : "rootfs"
 sda1
sd 0:0:0:0: [sda] Sector size 0 reported, assuming 512.
UBI: attaching mtd2 to ubi0
UBI: physical eraseblock size:   131072 bytes (128 KiB)
UBI: logical eraseblock size:    126976 bytes
UBI: smallest flash I/O unit:    2048
UBI: sub-page size:              512
UBI: VID header offset:          2048 (aligned 2048)
UBI: data offset:                4096
sd 0:0:0:0: [sda] Attached SCSI disk
 sdb1
sd 1:0:0:0: [sdb] Sector size 0 reported, assuming 512.
sd 1:0:0:0: [sdb] Attached SCSI disk
UBI: attached mtd2 to ubi0
UBI: MTD device name:            "rootfs"
UBI: MTD device size:            249 MiB
UBI: number of good PEBs:        1992
UBI: number of bad PEBs:         0
UBI: max. allowed volumes:       128
UBI: wear-leveling threshold:    4096
UBI: number of internal volumes: 1
UBI: number of user volumes:     1
UBI: available PEBs:             0
UBI: total number of reserved PEBs: 1992
UBI: number of PEBs reserved for bad PEB handling: 38
UBI: max/mean erase counter: 1/0
UBI: image sequence number: 0
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_marvell ehci_marvell.70059: Marvell Orion EHCI
ehci_marvell ehci_marvell.70059: new USB bus registered, assigned bus number 1
UBI: background thread "ubi_bgt0d" started, PID 478
ehci_marvell ehci_marvell.70059: irq 19, io base 0xf1050100
ehci_marvell ehci_marvell.70059: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
xhci_hcd 0000:00:01.0: xHCI Host Controller
xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:00:01.0: irq 9, io mem 0xe0000000
xhci_hcd 0000:00:01.0: Failed to enable MSI-X
xhci_hcd 0000:00:01.0: failed to allocate MSI entry
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:00:01.0: xHCI Host Controller
xhci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 3
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
cpufreq: Setting CPU Frequency to 1000000 KHz
cpufreq: Setting PowerSaveState to off
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc)
Freeing init memory: 724K
usb 2-2: new high-speed USB device number 2 using xhci_hcd
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size:   239857664 bytes (234236 KiB, 228 MiB, 1889 LEBs)
UBIFS: journal size:       9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format:       w4/r0 (latest is w4/r0)
UBIFS: default compressor: zlib
UBIFS: reserved for root:  0 bytes (0 KiB)
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
usb 2-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microf                                                                                                                     rames
usb 2-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microfr                                                                                                                     ames
scsi2 : usb-storage 2-2:1.0
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access     Intenso  Rainbow Line          PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdc] 15482880 512-byte logical blocks: (7.92 GB/7.38 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI removable disk
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
uncorrectable error :
uncorrectable error :
end_request: I/O error, dev mtdblock0, sector 0
md: md0 stopped.
md: bind<sda1>
raid1: raid set md0 active with 1 out of 2 mirrors
md0: detected capacity change from 0 to 2000264495104
 md0: unknown partition table
EXT4-fs (md0): barriers enabled
kjournald2 starting: pid 1888, dev md0:8, commit interval 5 seconds
EXT4-fs (md0): internal journal on md0:8
EXT4-fs (md0): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (md0): recovery complete
EXT4-fs (md0): mounted filesystem with ordered data mode
EXT4-fs (sdb1): barriers enabled
kjournald2 starting: pid 1892, dev sdb1:8, commit interval 5 seconds
EXT4-fs (sdb1): internal journal on sdb1:8
EXT4-fs (sdb1): delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs (sdb1): recovery complete
EXT4-fs (sdb1): mounted filesystem with ordered data mode
aufs 2-standalone.tree-31-20100823
GbE port 0: TxEnable WA - Enabled, deep=1, tx_en_bk=1

eth0: link down
eth0: started
eth0: link up, full duplex, speed 1 Gbps
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Adding 511992k swap on /mnt/disk1//.swapfile.  Priority:-1 extents:3 across:5283                                                                                                                     76k
tntfs: module license 'Commercial. For support email ntfs-support@tuxera.com.' t                                                                                                                     aints kernel.
Disabling lock debugging due to kernel taint
Tuxera NTFS driver 3013.9.19 [Flags: R/W MODULE].
usb 2-2: USB disconnect, device number 2
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
usb 2-2: new high-speed USB device number 3 using xhci_hcd
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
xhci_hcd 0000:00:01.0: WARN: short transfer on control ep
usb 2-2: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microf                                                                                                                     rames
usb 2-2: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microfr                                                                                                                     ames
scsi3 : usb-storage 2-2:1.0
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 3:0:0:0: Direct-Access     Intenso  Rainbow Line          PQ: 0 ANSI: 0 CCS
sd 3:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: [sdc] 15482880 512-byte logical blocks: (7.92 GB/7.38 GiB)
sd 3:0:0:0: [sdc] Write Protect is off
sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 3:0:0:0: [sdc] Assuming drive cache: write through
sd 3:0:0:0: [sdc] Attached SCSI removable disk
usb 2-2: USB disconnect, device number 3
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
FAT: bread failed in fat_clusters_flush
eth0: stopped
eth0: link down
eth0: started
eth0: link up, full duplex, speed 1 Gbps
Alignment trap: not handling swp instruction
Alignment trap: not handling instruction e1043090 at [<40381a0c>]
Unhandled fault: alignment exception (0x801) at 0x464c457f
Alignment trap: not handling swp instruction
Alignment trap: not handling instruction e1043090 at [<40381a0c>]
Unhandled fault: alignment exception (0x801) at 0x464c457f
Alignment trap: not handling swp instruction
Alignment trap: not handling instruction e1043090 at [<40381a0c>]
Unhandled fault: alignment exception (0x801) at 0x464c457f
Alignment trap: not handling swp instruction
Alignment trap: not handling instruction e1043090 at [<40381a0c>]
Unhandled fault: alignment exception (0x801) at 0x464c457f


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Wed Jan 08, 2014 1:36 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6015
Thanks. I'll summarize:
  • 1GHz Kirkwood SoC
  • 256MB Ram
  • 256MB flashrom
  • Linux 2.6.31.8
  • USB3

Some striking details:
  • The rootfs runs from (read/write mounted!) flash, 247MB ubifs.
  • The kernel has build-in support for TUN, which suggests that the box can do something with some kind of VPN. Cloud functions?
  • There is a layered filesystem (aufs) mounted on /home, and several other directories.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Sat Jan 11, 2014 11:25 am 
Offline

Joined: Sat Jan 11, 2014 11:17 am
Posts: 3
Question to all:

I am fiddling with the same device. Being a newbie at getting in such devices, and do not want to destroy it immediately.

- not so sure about the login, tried with putty both ssh and telenet but it does not react. Suppose I need that backdoor prodcedure? would anybody mind describing that in some detail?
- was a bit disappointed that one cannot open the cabinet as medion tells me that then warranty is void and blablabla, so you need to send the device in, not sure they will be able to get my data back. In case one of the disks breaks I would like to be able to replace the bad disk myself and have the data regenerated. Does anybody have a procedure at hand how to do this?

many thanks for any info.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Sat Jan 11, 2014 1:25 pm 
Offline

Joined: Mon Jun 16, 2008 10:45 am
Posts: 6015
Are you sure ssh doesn't react? bart107 told the NAS runs HipServ OS from Axentra. Some googling on 'HipServ OS ssh' shows pages like this, which only tells which password to use, and not how to enable the ssh server.
bart107 also only mentioned the password, and I guess he would have told if some trick was needed to enable the ssh server, unless it's obvious, like just enabeling it in the webinterface.

The same OS seems to be running on a number of NASses, among which the Netgears. So I guess exchanging a disk is as easy as plugging in a new one (as least as big as the old one), and power the box up. Maybe you'll have to acknowledge the rebuild in the webinterface.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Sun Jan 12, 2014 3:02 pm 
Offline

Joined: Sat Jan 11, 2014 11:17 am
Posts: 3
When trying harder it does seem to react to SSH, so that is good news! Now I face the problem of constructing the login. Not sure which of the numbers I need to use for doing that. On the box itself it has e.g a MSN, a MD a YC and a SN number. tried all of those in the syntax:

username_hipserv_medion_numberabove@IP#

note that while googling I find also a lot of "hipserv2" examples.

I know the user I think that was the first one I created when I installed the box.

Is this the right procedure? It is likely a small mistake I make.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Sun Jan 12, 2014 4:23 pm 
Offline

Joined: Sat Jan 11, 2014 1:52 pm
Posts: 2
Hi Gert,

It's indeed hipserv2...
And you can find the serial number when you login to the Medion Lifecloud and click on "About Lifecloud Medion" in the lower left corner.
I hope this will help you.


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Sun Jan 12, 2014 4:48 pm 
Offline

Joined: Sat Jan 11, 2014 11:17 am
Posts: 3
that did the trick! many thanks for the answer. otherwise it is a really wild guess!

thanks again!

still anyone who knows the procedure to recover a broken disk after replacement?

Kind Regards


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Thu Mar 20, 2014 11:35 am 
Offline

Joined: Thu Mar 20, 2014 11:30 am
Posts: 1
Hi all,
I've got a simple question: does this NAS have a fan or is it fanless like the other medion NAS?


Top
 Profile  
 
 Post subject: Re: Medion Life P89634
PostPosted: Thu Apr 24, 2014 2:09 pm 
Offline

Joined: Thu Apr 24, 2014 1:51 pm
Posts: 1
Hi everyone,

Indeed the MEDION LifeCloud uses the hipserv OS. Seems you have quickly found your "product name" of medion which will help you gain SSH access. To gain SSH access, you must be using an admin account, regular users are refused via SSH.

Happy to answer any other questions you may have.

Cheers,
Roby!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group