NAS326 issues

Post Reply
Serjkzn
Posts: 1
Joined: Sun Nov 13, 2016 12:12 pm

NAS326 issues

Post by Serjkzn » Sun Nov 13, 2016 12:30 pm

Hi,

I just bought a NAS326.
I mounted a 500 GB hard drive and everything seemed OK.
After this I mouunted a 640 GB hdd and I linked them in RAID 1.
The syncronisation took 12 hours and the status remained Changing. After another 16 hours I restarted the NAS.
Now everything is marked OK - Healthy but:

-there is no client who is using the NAS. I even disconnected from the network. However there is a high hardidsk activity and the processor is at 100%.
-I cannot create a simple partition of 140 GB on the second drive.

Do you have any ideea?

Is there a way to see what process is running and using hardisks?
I was also trying to connect through SSH but I am not able yet (SSH is enabled).

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: NAS326 issues

Post by Mijzelf » Mon Nov 14, 2016 12:18 pm

Serjkzn wrote:-there is no client who is using the NAS. I even disconnected from the network. However there is a high hardidsk activity and the processor is at 100%.
That is probably the ZyXELCloud-Agent which is generating thumbnails.
-I cannot create a simple partition of 140 GB on the second drive.
That is beyond the limits of the GUI. Maybe it's possible to do that manually, depending on how the disk is partitioned now.

Post Reply