Questions on the NAS326

Post Reply
vprasinos
Posts: 31
Joined: Fri Oct 21, 2016 1:12 pm

Questions on the NAS326

Post by vprasinos » Fri Nov 25, 2016 11:50 pm

So here are my questions after overcoming a lot of troubles with external drives - due to new firmware that resolved the problems:

1. Can't mount NFS shares on any external drives. Is this even possible? Not with the web gui, but if not how?
2. Why can't I rename my external HDs to WD3 for example while WD3T is acceptable? I remember when I first got the NAS I could rename to WD3. Strange.
3. dmesg reports

Code: Select all

EXT4-fs (md2): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: usrquota,data=ordered,barrier=1
EXT4-fs (md3): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: usrquota,data=ordered,barrier=1
EXT4-fs (sdb1): warning: mounting fs with errors, running e2fsck is recommended
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: errors=continue
How can I run e2fsck since as soon as I umount the devs they keep autoremounting? Can I even do that on the NAS or should I connect to other machine? Is there a web interface tool to do this?
4. How can I find the locale of NAS326? I want this since I use Midnight Commander a lot and lines using UTF-8 in putty do not appear properly.

Thanks!

Post Reply