FFP stick on NAS326, boots ffp only the first time

Post Reply
cartman
Posts: 1
Joined: Sun Oct 01, 2017 3:10 pm

FFP stick on NAS326, boots ffp only the first time

Post by cartman » Mon Oct 02, 2017 12:51 am

Hello,
i got a strange problem:
- created ffp stick, nas booted from stick, everything seems - perfect (nearly 2GB, front USB)
- did a lot of configuration (pureftp, apache, some scripts, tweaks, .. ) - perfect
- rebooted to see if everything is fine after a reboot, the usb stick was not touched since first ffp boot

:o NAS does not boot FFP any more (tried on several usb ports, many times)

I have absolutely no idea where to look at.

Thanks a lot for any idea

Mijzelf
Posts: 6250
Joined: Mon Jun 16, 2008 10:45 am

Re: FFP stick on NAS326, boots ffp only the first time

Post by Mijzelf » Tue Oct 03, 2017 7:27 am

I think your nas3xx_check_file is missing. (Wiki, Forum). If that is true, you can extract it from your ffpstick.zip, and put it on the FAT partition of the stick.

Another point, it seems that FFP kills the webinterface of the 326. Google can find several reports of that. That shouldn't be possible, as FFP is designed to not interfere with the firmware, and the NAS5xx, which' firmware is built from the same code, has no problems. Alas I have not been able to investigate it, as I don't have a 326, and attempts to investigate through the forum were fruitless.
I suggest you to use Entware-ng instead.

Post Reply