hello guys
i hope you are good , me now not so good but i hope someone can help to make me higher
i have this nas with two series of disks. 1tb (two disks) almost empty and the other with 3 tb hitachi deskstar 7200 (two disks too) . both in mirror1 . today i received this message " The data storage pool is damaged and data security is at risk. "
i checked now and the icon of one disk of 3 tb has a red X on it. no info about drive
now i bought two new drives also because its impossible to find a new one with same specifications ( i found but its more expensive then buy two new one.)
then i would like to know how is the procedure to move all the data i have in the old drive to the new raid. there is a internal procedure to do this fast and safe??
thank for your help. and have a good weekend:
Luca
px6-300d and storage pool compromised
Post Reply
1 post
• Page 1 of 1
Jump to
- General
- ↳ Announcements
- ↳ Development
- ↳ General
- ↳ Kernel
- ↳ Foonas
- ↳ Everything else
- Hardware
- ↳ Lacie
- ↳ CloudBox
- ↳ d2 Network
- ↳ d2 Network 2
- ↳ EDmini
- ↳ EDmini v2
- ↳ Ethernet Big Disk
- ↳ Internet Space
- ↳ Network Space
- ↳ Network Space 2
- ↳ Network Space MAX
- ↳ Wireless Space
- ↳ 2big Network
- ↳ 2big Network 2
- ↳ 5big Network
- ↳ 5big Network 2
- ↳ Other
- ↳ Lenovo/Iomega
- ↳ EZ Media & Backup Center
- ↳ iConnect
- ↳ Home Media Network Hard Drive
- ↳ Home Media Network Hard Drive - Cloud Edition
- ↳ StorCenter ix2-200
- ↳ StorCenter ix4-200d
- ↳ StorCenter ix4-200r
- ↳ StorCenter ix4-300d
- ↳ Other
- ↳ Zyxel
- ↳ NSA210
- ↳ NSA-220/NSA-220 Plus
- ↳ NSA221
- ↳ NSA-2400/NSA-2401
- ↳ NSA-310/320/325
- ↳ NAS520/540/542
- ↳ Other
- ↳ Other Manufacturers
- ↳ Belkin
- ↳ Data Robotics Inc
- ↳ LG
- ↳ Medion
- ↳ Netgear
- ↳ Plextor
- ↳ Sitecom
- ↳ Shuttle
- ↳ Thecus
- ↳ Xtreamer
- ↳ Other
- Foreign
- ↳ German