General NAS-Central Forums

Welcome to the NAS community
It is currently Wed Aug 16, 2017 1:32 pm

All times are UTC




Post new topic Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Sun Jul 24, 2016 9:17 am 
Offline

Joined: Tue Mar 15, 2016 4:06 pm
Posts: 10
Hi all!

I have a NAS540 and 3 drives one is standalone and two are RAID1.

I install ffp on the disk1 which is standalone so I see the disk in MC //mnt/HD_a2/ by default.
But the contents of the RAID1 I see under //i-data/5ce63997/
How can I mount the RAID1 like the standalone disk?


Top
 Profile  
 
PostPosted: Tue Jul 26, 2016 8:59 am 
Offline

Joined: Sun Mar 27, 2016 1:05 pm
Posts: 10
I don't think you can do it without breaking zyxel software on nas. I also think that it mount point would be restored after hot-unplugging<>hot-plugging drive again / nas reboot.

But you can add softlink from ssh/telnet as follows:

Code:
mkdir /mnt/HD_RAID
ln -s /i-data/5ce63997 /mnt/HD_RAID


thanks,
swider


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC


Who is online

Users browsing this forum: No registered users and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group