Hi,
I have a NAS-542. The first three disks work at 3 Gbps, but the fourth works at 1.5 Gbps.
Is it normal? Or is my NAS defective?
If I plug in only one disk into different slots, the result is the same - The same disk works at 3 Gbps in slot 1..3, and at 1.5 Gbps in slot 4.
Sometimes the disk4 is mounted half an our after the NAS is powered on, so the RAID must be resynced. Have you seen a similar problem?
Thanks in advance
NAS 542 SATA speed
Mindspeed Comcerto 2000 based
Post Reply
1 post
• Page 1 of 1
Jump to
- General
- ↳ Announcements
- ↳ Development
- ↳ General
- ↳ Kernel
- ↳ Foonas
- ↳ Everything else
- Hardware
- ↳ Lacie
- ↳ CloudBox
- ↳ d2 Network
- ↳ d2 Network 2
- ↳ EDmini
- ↳ EDmini v2
- ↳ Ethernet Big Disk
- ↳ Internet Space
- ↳ Network Space
- ↳ Network Space 2
- ↳ Network Space MAX
- ↳ Wireless Space
- ↳ 2big Network
- ↳ 2big Network 2
- ↳ 5big Network
- ↳ 5big Network 2
- ↳ Other
- ↳ Lenovo/Iomega
- ↳ EZ Media & Backup Center
- ↳ iConnect
- ↳ Home Media Network Hard Drive
- ↳ Home Media Network Hard Drive - Cloud Edition
- ↳ StorCenter ix2-200
- ↳ StorCenter ix4-200d
- ↳ StorCenter ix4-200r
- ↳ StorCenter ix4-300d
- ↳ Other
- ↳ Zyxel
- ↳ NSA210
- ↳ NSA-220/NSA-220 Plus
- ↳ NSA221
- ↳ NSA-2400/NSA-2401
- ↳ NSA-310/320/325
- ↳ NAS520/540/542
- ↳ Other
- ↳ Other Manufacturers
- ↳ Belkin
- ↳ Data Robotics Inc
- ↳ LG
- ↳ Medion
- ↳ Netgear
- ↳ Plextor
- ↳ Sitecom
- ↳ Shuttle
- ↳ Thecus
- ↳ Xtreamer
- ↳ Other
- Foreign
- ↳ German