After updating to FW printer not recognized by print server.

Mindspeed Comcerto 2000 based
Post Reply
jagdtigger
Posts: 117
Joined: Sat Jun 08, 2013 9:02 am

After updating to FW printer not recognized by print server.

Post by jagdtigger » Sat Jul 08, 2017 12:58 pm

Hi all.

So i just upgrded the FW to V5.21(AATB.0) and had some issues. The only one left is the print server. I have a samsung ml-1665 printer connected but i cant se it in the webui. Dmesg shows that is connected properly:

Code: Select all

[  373.107793] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[  373.108107] hub 1-1:1.0: port 1, status 0100, change 0001, 12 Mb/s
[  373.108209] usb 1-1.1: USB disconnect, device number 3
[  373.113471] usb 1-1.1: unregistering device
[  373.113481] usb 1-1.1: unregistering interface 1-1.1:1.0
[  373.113596] drivers/usb/core/file.c: removing 0 minor
[  373.114451] usblp0: removed
[  373.119697] usb 1-1.1: usb_disable_device nuking all URBs
[  373.119761] usb 1-1.1: Successful Endpoint Configure command
[  373.286192] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x100
[  375.411717] hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0002
[  375.412010] hub 1-1:1.0: port 1, status 0101, change 0001, 12 Mb/s
[  375.566024] hub 1-1:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[  375.655960] usb 1-1.1: new full-speed USB device number 4 using xhci-hcd
[  375.683497] usb 1-1.1: ep0 maxpacket = 16
[  375.683534] usb 1-1.1: Successful evaluate context command
[  375.684101] usb 1-1.1: default language 0x0409
[  375.684626] usb 1-1.1: udev 4, busnum 1, minor = 3
[  375.684635] usb 1-1.1: New USB device found, idVendor=04e8, idProduct=3301
[  375.691769] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  375.699152] usb 1-1.1: Product: ML-1660 Series
[  375.703609] usb 1-1.1: Manufacturer: Samsung Electronics Co., Ltd.
[  375.709831] usb 1-1.1: SerialNumber: Z4ZFBKAZA00641X.
[  375.716731] usb 1-1.1: usb_probe_device
[  375.716748] usb 1-1.1: configuration #1 chosen from 1 choice
[  375.716821] usb 1-1.1: Successful Endpoint Configure command
[  375.716955] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[  375.717637] usblp 1-1.1:1.0: usb_probe_interface
[  375.717650] usblp 1-1.1:1.0: usb_probe_interface - got id
[  375.717825] usb 1-1.1: Successful Endpoint Configure command
[  375.723877] usblp 1-1.1:1.0: looking for a minor, starting at 0
[  375.727052] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3301
[  375.741371] drivers/usb/core/inode.c: creating file '004'
Any idea how can i force the print server to recognize it?

Thanks in advance for the help :)
Zyxel NSA325 [4.81(AAAJ.1) + Metarepo, local apt-mirror for ubuntu and debian]
Zyxel NAS540 [V5.20(AATB.0)]
Synology DS416

Post Reply