Seagate Ironwolf wont fit into tray...

Mindspeed Comcerto 2000 based
Post Reply
jagdtigger
Posts: 118
Joined: Sat Jun 08, 2013 9:02 am

Seagate Ironwolf wont fit into tray...

Post by jagdtigger » Mon Aug 07, 2017 10:58 am

Hi all.

So i just got my 4 new HDD's but they wont fit into the trays because of some missing holes:
https://dl.dropboxusercontent.com/u/120 ... 125516.jpg

The side ones arent a problem i have screws for it. But im not sure if its safe to cut off one of the little bars from the tray...

Any thoughts on this?
Zyxel NSA325 [4.81(AAAJ.1) + Metarepo]
Zyxel NAS540 [V5.20(AATB.0) + Metarepo]
Synology DS416

Mijzelf
Posts: 6205
Joined: Mon Jun 16, 2008 10:45 am

Re: Seagate Ironwolf wont fit into tray...

Post by Mijzelf » Fri Aug 11, 2017 7:26 am

Why would it be unsafe to remove them?

Anyway, can't you use the bottom holes to mount it to the tray? In that case you don't need to use the side bars.

jagdtigger
Posts: 118
Joined: Sat Jun 08, 2013 9:02 am

Re: Seagate Ironwolf wont fit into tray...

Post by jagdtigger » Fri Aug 11, 2017 7:59 am

Mijzelf wrote:Why would it be unsafe to remove them?

Anyway, can't you use the bottom holes to mount it to the tray? In that case you don't need to use the side bars.
Better to be safe than sorry ;) . The bottom holes are for 2,5 drives... The sidebar wasnt an issue because i will use screws in this case.
Zyxel NSA325 [4.81(AAAJ.1) + Metarepo]
Zyxel NAS540 [V5.20(AATB.0) + Metarepo]
Synology DS416

Post Reply