px6-300d: Need Help to access a volume

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Wed Aug 08, 2018 3:40 pm

I have a similar problem with my px6-300d
The NAS does show the shares but i cannot acces them.
If i enter the NAS by ssh on root, i can find the folders by listing cd /mnt/pools/A/A0/ ls -la like Mijzelf told.
However i cannot acces or copy.
Can someone help me?

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Wed Aug 08, 2018 5:51 pm

root@storage-itp:/# cd /mnt/pools/A/A0/
root@storage-itp:/mnt/pools/A/A0# ls -la
ls: cannot access .trash: Invalid argument
ls: cannot access The Hive: Invalid argument
ls: cannot access Software: Invalid argument
ls: cannot access Documents: Invalid argument
ls: cannot access ApplicationData: Invalid argument
ls: cannot access Milestone Arcus Video Repository: Invalid argument
ls: cannot access Milestone Arcus: Invalid argument
total 4
drwxr-xr-x 15 root root 4096 Aug 4 18:36 .
drwxrwxrwx 3 nobody users 60 Aug 8 12:44 ..
?????????? ? ? ? ? ? .trash
?????????? ? ? ? ? ? ApplicationData
?????????? ? ? ? ? ? Documents
drwxrwxrwx 4 nobody users 42 Apr 2 2016 MediaDB
?????????? ? ? ? ? ? Milestone Arcus
?????????? ? ? ? ? ? Milestone Arcus Video Repository
drwxrwxrwx 3 nobody users 19 Aug 4 12:03 New
drwxrwxrwx 3 nobody users 17 Aug 4 11:42 Outros
drwxrwxrwx 3 nobody users 41 Jul 14 2014 QuikTransfer
drwxrwxrwx 2 nobody users 6 Aug 4 12:03 Sandra
?????????? ? ? ? ? ? Software
?????????? ? ? ? ? ? The Hive
drwxrwxrwx 2 nobody users 6 Aug 4 18:36 TimeMachine

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Thu Aug 09, 2018 7:16 am

That is a corrupted filesystem. Have a look at dmesg, to see if it are hardware errors.

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Thu Aug 09, 2018 12:44 pm

Thanks Mijzelf for the rapid response,
the dmesg log is very large, it follows here, can you find something wrong, my knowledge of linux is almost nothing (niets).


root@storage-itp:/# cat /var/log/dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.34.2 (soho@bsoho113.lss.emc.com) (gcc version 4.3.2 (crosstool-NG-1.4.1) ) #1 SMP Thu Sep 8 12:39:21 EDT 2011
[ 0.000000] Command line: console=tty0 console=ttyS0,115200
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
[ 0.000000] BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
[ 0.000000] BIOS-e820: 000000007f690000 - 000000007f69e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f69e000 - 000000007f6e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f6e0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7f690 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f690000
[ 0.000000] 0000000000 - 007f600000 page 2M
[ 0.000000] 007f600000 - 007f690000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f690000 @ 16000-1a000
[ 0.000000] RAMDISK: 7f4b8000 - 7f680000
[ 0.000000] ACPI: RSDP 00000000000f9f50 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007f690000 00044 (v01 ▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒ 20110317 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007f690200 00084 (v01 031711 FACP1317 20110317 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007f690610 0584B (v01 00212 00212004 00000004 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007f69e000 00040
[ 0.000000] ACPI: APIC 000000007f690390 0006C (v01 031711 APIC1317 20110317 MSFT 00000097)
[ 0.000000] ACPI: SPCR 000000007f690400 00050 (v01 031711 SPCR1317 20110317 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007f690450 0003C (v01 031711 OEMMCFG 20110317 MSFT 00000097)
[ 0.000000] ACPI: SLIC 000000007f690490 00176 (v01 ▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒ 20110317 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007f69e040 00076 (v01 031711 OEMB1317 20110317 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007f69a610 00038 (v01 031711 OEMHPET 20110317 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007f69e0c0 02024 (v01 031711 GMCHSCI 20110317 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880002200000-ffff8800041fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x0007f690
[ 0.000000] On node 0 totalpages: 521754
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8091 pages used for memmap
[ 0.000000] DMA32 zone: 509685 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] early_res array is doubled to 64 at [18000 - 187ff]
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001a00000 s81704 r8192 d20696 u524288
[ 0.000000] pcpu-alloc: s81704 r8192 d20696 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 513599
[ 0.000000] Kernel command line: console=tty0 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Subtract (49 early reservations)
[ 0.000000] #1 [0001000000 - 00019b8774] TEXT DATA BSS
[ 0.000000] #2 [007f4b8000 - 007f680000] RAMDISK
[ 0.000000] #3 [00019b9000 - 00019b9127] BRK
[ 0.000000] #4 [00000ff790 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000ff780 - 00000ff790] MP-table mpf
[ 0.000000] #6 [000009a400 - 00000fc7b0] BIOS reserved
[ 0.000000] #7 [00000fc924 - 00000ff780] BIOS reserved
[ 0.000000] #8 [00000fc7b0 - 00000fc924] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000012000] TRAMPOLINE
[ 0.000000] #10 [0000012000 - 0000016000] ACPI WAKEUP
[ 0.000000] #11 [0000016000 - 0000018000] PGTABLE
[ 0.000000] #12 [00019b9140 - 00019ba140] BOOTMEM
[ 0.000000] #13 [00019b8780 - 00019b8900] BOOTMEM
[ 0.000000] #14 [00021bb000 - 00021bc000] BOOTMEM
[ 0.000000] #15 [00021bc000 - 00021bd000] BOOTMEM
[ 0.000000] #16 [0002200000 - 0004200000] MEMMAP 0
[ 0.000000] #17 [00019b8900 - 00019b8a80] BOOTMEM
[ 0.000000] #18 [00019ba140 - 00019c6140] BOOTMEM
[ 0.000000] #19 [00019c7000 - 00019c8000] BOOTMEM
[ 0.000000] #20 [00019b8a80 - 00019b8ac1] BOOTMEM
[ 0.000000] #21 [00019b8b00 - 00019b8b43] BOOTMEM
[ 0.000000] #22 [00019b8b80 - 00019b8db0] BOOTMEM
[ 0.000000] #23 [00019b8dc0 - 00019b8e28] BOOTMEM
[ 0.000000] #24 [00019b8e40 - 00019b8ea8] BOOTMEM
[ 0.000000] #25 [00019b8ec0 - 00019b8f28] BOOTMEM
[ 0.000000] #26 [00019b8f40 - 00019b8fa8] BOOTMEM
[ 0.000000] #27 [00019c6140 - 00019c61a8] BOOTMEM
[ 0.000000] #28 [00019c61c0 - 00019c6228] BOOTMEM
[ 0.000000] #29 [00019c6240 - 00019c62a8] BOOTMEM
[ 0.000000] #30 [00019c62c0 - 00019c6328] BOOTMEM
[ 0.000000] #31 [00019c6340 - 00019c63a8] BOOTMEM
[ 0.000000] #32 [00019b8fc0 - 00019b8fe0] BOOTMEM
[ 0.000000] #33 [00019c63c0 - 00019c63e2] BOOTMEM
[ 0.000000] #34 [00019c6400 - 00019c6422] BOOTMEM
[ 0.000000] #35 [0001a00000 - 0001a1b000] BOOTMEM
[ 0.000000] #36 [0001a80000 - 0001a9b000] BOOTMEM
[ 0.000000] #37 [0001b00000 - 0001b1b000] BOOTMEM
[ 0.000000] #38 [0001b80000 - 0001b9b000] BOOTMEM
[ 0.000000] #39 [00019c6440 - 00019c6448] BOOTMEM
[ 0.000000] #40 [00019c6480 - 00019c6488] BOOTMEM
[ 0.000000] #41 [00019c64c0 - 00019c64d0] BOOTMEM
[ 0.000000] #42 [00019c6500 - 00019c6520] BOOTMEM
[ 0.000000] #43 [00019c6540 - 00019c6670] BOOTMEM
[ 0.000000] #44 [00019c6680 - 00019c66d0] BOOTMEM
[ 0.000000] #45 [00019c6700 - 00019c6750] BOOTMEM
[ 0.000000] #46 [00019c8000 - 00019d0000] BOOTMEM
[ 0.000000] #47 [0001b9b000 - 0001d9b000] BOOTMEM
[ 0.000000] #48 [0001d9b000 - 0001e9b000] BOOTMEM
[ 0.000000] Memory: 2038832k/2087488k available (5131k kernel code, 472k absent, 48184k reserved, 3585k data, 448k init)
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1795.819 MHz processor.
[ 0.008009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.63 BogoMIPS (lpj=7183276)
[ 0.016044] Security Framework initialized
[ 0.020020] Mount-cache hash table entries: 256
[ 0.024201] Initializing cgroup subsys ns
[ 0.028011] Initializing cgroup subsys cpuacct
[ 0.032010] Initializing cgroup subsys devices
[ 0.036006] Initializing cgroup subsys freezer
[ 0.040035] CPU: Physical Processor ID: 0
[ 0.044005] CPU: Processor Core ID: 0
[ 0.047713] mce: CPU supports 5 MCE banks
[ 0.048012] CPU0: Thermal monitoring enabled (TM1)
[ 0.052007] using mwait in idle threads.
[ 0.056004] Performance Events: Atom events, Intel PMU driver.
[ 0.061716] ... version: 3
[ 0.064004] ... bit width: 40
[ 0.068004] ... generic registers: 2
[ 0.072004] ... value mask: 000000ffffffffff
[ 0.076004] ... max period: 000000007fffffff
[ 0.080004] ... fixed-purpose events: 3
[ 0.084004] ... event mask: 0000000700000003
[ 0.088039] ACPI: Core revision 20100121
[ 0.108086] Setting APIC routing to flat
[ 0.112327] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.161235] CPU0: Intel(R) Atom(TM) CPU D525 @ 1.80GHz stepping 0a
[ 0.168000] Booting Node 0, Processors #1 #2 #3 Ok.
[ 0.448014] Brought up 4 CPUs
[ 0.451036] Total of 4 processors activated (14364.66 BogoMIPS).
[ 0.452917] xor: automatically using best checksumming function: generic_sse
[ 0.476005] generic_sse: 5540.000 MB/sec
[ 0.480004] xor: using function: generic_sse (5540.000 MB/sec)
[ 0.484008] regulator: core version 0.5
[ 0.488064] NET: Registered protocol family 16
[ 0.492052] i2c-core: driver [dummy] registered
[ 0.492052] ACPI: bus type pci registered
[ 0.500046] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.504005] PCI: not using MMCONFIG
[ 0.508009] PCI: Using configuration type 1 for base access
[ 0.524155] bio: create slab <bio-0> at 0
[ 0.529888] ACPI: EC: Look up EC in DSDT
[ 0.534274] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.550477] ACPI: Interpreter enabled
[ 0.552005] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.557607] ACPI: Using IOAPIC for interrupt routing
[ 0.560103] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.576690] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.636558] ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be 09 (20100121/tbutils-314)
[ 0.649020] ACPI: No dock devices found.
[ 0.652007] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.660650] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.668509] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.676021] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.680006] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.688006] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.696006] pci_root PNP0A08:00: host bridge window [mem 0x7f700000-0xdfffffff]
[ 0.704006] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff]
[ 0.712075] pci 0000:00:02.0: reg 10: [mem 0xfea80000-0xfeafffff]
[ 0.712083] pci 0000:00:02.0: reg 14: [io 0xcc00-0xcc07]
[ 0.712090] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[ 0.712097] pci 0000:00:02.0: reg 1c: [mem 0xfe900000-0xfe9fffff]
[ 0.712137] pci 0000:00:02.1: reg 10: [mem 0xfe880000-0xfe8fffff]
[ 0.712225] pci 0000:00:1a.0: reg 20: [io 0xc880-0xc89f]
[ 0.712293] pci 0000:00:1a.1: reg 20: [io 0xc800-0xc81f]
[ 0.712361] pci 0000:00:1a.2: reg 20: [io 0xc480-0xc49f]
[ 0.712428] pci 0000:00:1a.7: reg 10: [mem 0xfea7bc00-0xfea7bfff]
[ 0.712482] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.712489] pci 0000:00:1a.7: PME# disabled
[ 0.712529] pci 0000:00:1b.0: reg 10: [mem 0xfea74000-0xfea77fff 64bit]
[ 0.712570] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.712576] pci 0000:00:1b.0: PME# disabled
[ 0.712649] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.712655] pci 0000:00:1c.0: PME# disabled
[ 0.712726] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.712732] pci 0000:00:1c.3: PME# disabled
[ 0.712801] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.712806] pci 0000:00:1c.4: PME# disabled
[ 0.712875] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.712881] pci 0000:00:1c.5: PME# disabled
[ 0.712935] pci 0000:00:1d.0: reg 20: [io 0xc400-0xc41f]
[ 0.713004] pci 0000:00:1d.1: reg 20: [io 0xc080-0xc09f]
[ 0.713072] pci 0000:00:1d.2: reg 20: [io 0xc000-0xc01f]
[ 0.713140] pci 0000:00:1d.7: reg 10: [mem 0xfea7b800-0xfea7bbff]
[ 0.713193] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.713200] pci 0000:00:1d.7: PME# disabled
[ 0.713325] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.720008] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.728007] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.736065] pci 0000:00:1f.2: reg 10: [io 0xbc00-0xbc07]
[ 0.736073] pci 0000:00:1f.2: reg 14: [io 0xb880-0xb883]
[ 0.736081] pci 0000:00:1f.2: reg 18: [io 0xb800-0xb807]
[ 0.736089] pci 0000:00:1f.2: reg 1c: [io 0xb480-0xb483]
[ 0.736097] pci 0000:00:1f.2: reg 20: [io 0xb400-0xb41f]
[ 0.736106] pci 0000:00:1f.2: reg 24: [mem 0xfea7b000-0xfea7b7ff]
[ 0.736138] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.736144] pci 0000:00:1f.2: PME# disabled
[ 0.736178] pci 0000:00:1f.3: reg 10: [mem 0xfea7ac00-0xfea7acff 64bit]
[ 0.736193] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.736257] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.740007] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.740014] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.740023] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.740100] pci 0000:02:00.0: reg 10: [mem 0xfebf0000-0xfebfffff]
[ 0.740173] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.740180] pci 0000:02:00.0: PME# disabled
[ 0.748022] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 0.752010] pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
[ 0.752018] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.752026] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.752103] pci 0000:03:00.0: reg 10: [io 0xd800-0xd8ff]
[ 0.752126] pci 0000:03:00.0: reg 18: [mem 0xfdeff000-0xfdefffff 64bit pref]
[ 0.752143] pci 0000:03:00.0: reg 20: [mem 0xfdef8000-0xfdefbfff 64bit pref]
[ 0.752190] pci 0000:03:00.0: supports D1 D2
[ 0.752195] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.752202] pci 0000:03:00.0: PME# disabled
[ 0.760020] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 0.764007] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.764014] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.764024] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.764099] pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
[ 0.764121] pci 0000:04:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
[ 0.764138] pci 0000:04:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
[ 0.764186] pci 0000:04:00.0: supports D1 D2
[ 0.764190] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.764197] pci 0000:04:00.0: PME# disabled
[ 0.772024] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 0.776008] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.776015] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.776024] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 0.776090] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.784007] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.784014] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.784023] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.784029] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.784034] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.784040] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.784046] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.784052] pci 0000:00:1e.0: bridge window [mem 0x7f700000-0xdfffffff] (subtractive decode)
[ 0.784058] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)
[ 0.784083] pci_bus 0000:00: on NUMA node 0
[ 0.784094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.784469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.784577] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.784681] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.784793] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.820177] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.828555] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.832852] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.841544] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.849157] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.858173] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.865553] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.873155] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)
[ 0.882619] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.888027] vgaarb: loaded
[ 0.892004] SCSI Scattered Spinup:
[ 0.896004] SCSI Scattered Spinup Feature Status: Enabled
[ 0.900123] SCSI subsystem initialized
[ 0.904042] libata version 3.00 loaded.
[ 0.904060] usbcore: registered new interface driver usbfs
[ 0.912047] usbcore: registered new interface driver hub
[ 0.916033] usbcore: registered new device driver usb
[ 0.991948] raid6: int64x1 343 MB/s
[ 1.059972] raid6: int64x2 565 MB/s
[ 1.127936] raid6: int64x4 632 MB/s
[ 1.195969] raid6: int64x8 768 MB/s
[ 1.264010] raid6: sse2x1 655 MB/s
[ 1.331921] raid6: sse2x2 1213 MB/s
[ 1.399920] raid6: sse2x4 2125 MB/s
[ 1.400004] raid6: using algorithm sse2x4 (2125 MB/s)
[ 1.408023] PCI: Using ACPI for IRQ routing
[ 1.412008] PCI: pci_cache_line_size set to 64 bytes
[ 1.412131] Expanded resource reserved due to conflict with PCI Bus 0000:00
[ 1.420005] reserve RAM buffer: 000000000009a400 - 000000000009ffff
[ 1.420012] reserve RAM buffer: 000000007f690000 - 000000007fffffff
[ 1.420106] Bluetooth: Core ver 2.15
[ 1.424046] NET: Registered protocol family 31
[ 1.428004] Bluetooth: HCI device and connection manager initialized
[ 1.432004] Bluetooth: HCI socket layer initialized
[ 1.440011] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 1.444008] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.452540] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.468033] Switching to clocksource tsc
[ 1.481494] Slow work thread pool: Starting up
[ 1.486100] Slow work thread pool: Ready
[ 1.490122] FS-Cache: Loaded
[ 1.493212] CacheFiles: Loaded
[ 1.496338] pnp: PnP ACPI init
[ 1.499466] ACPI: bus type pnp registered
[ 1.510072] pnp: PnP ACPI: found 15 devices
[ 1.514321] ACPI: ACPI bus type pnp unregistered
[ 1.519018] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 1.525693] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.532380] system 00:07: [io 0x0a00-0x0adf] has been reserved
[ 1.538361] system 00:07: [io 0x0ae0-0x0aef] has been reserved
[ 1.544352] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.550331] system 00:08: [io 0x0800-0x087f] has been reserved
[ 1.556309] system 00:08: [io 0x0480-0x04ff] could not be reserved
[ 1.562637] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.569313] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.575989] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 1.582670] system 00:0b: [mem 0xffc00000-0xffefffff] has been reserved
[ 1.589354] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.596376] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.603057] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.609738] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.616759] system 00:0e: [mem 0x000c0000-0x000cffff] has been reserved
[ 1.623430] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 1.630450] system 00:0e: [mem 0x00100000-0x7f6fffff] could not be reserved
[ 1.637474] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved
[ 1.650165] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f700000-0x7f8fffff]
[ 1.657111] pci 0000:00:1c.0: BAR 15: assigned [mem 0x7f900000-0x7fafffff 64bit pref]
[ 1.665019] pci 0000:00:1c.3: BAR 15: assigned [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 1.672929] pci 0000:00:1c.4: BAR 14: assigned [mem 0x7fd00000-0x800fffff]
[ 1.679866] pci 0000:00:1c.5: BAR 14: assigned [mem 0x80100000-0x804fffff]
[ 1.686802] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 1.693043] pci 0000:00:1c.3: BAR 13: assigned [io 0x2000-0x2fff]
[ 1.699284] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 1.704568] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 1.710722] pci 0000:00:1c.0: bridge window [mem 0x7f700000-0x7f8fffff]
[ 1.717571] pci 0000:00:1c.0: bridge window [mem 0x7f900000-0x7fafffff 64bit pref]
[ 1.725393] pci 0000:00:1c.3: PCI bridge to [bus 02-02]
[ 1.730676] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 1.737780] pci 0000:00:1c.3: bridge window [mem 0xfeb00000-0xfebfffff]
[ 1.744626] pci 0000:00:1c.3: bridge window [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 1.752451] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
[ 1.757736] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 1.763892] pci 0000:00:1c.4: bridge window [mem 0x7fd00000-0x800fffff]
[ 1.770739] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.778562] pci 0000:00:1c.5: PCI bridge to [bus 04-04]
[ 1.783844] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 1.789996] pci 0000:00:1c.5: bridge window [mem 0x80100000-0x804fffff]
[ 1.796844] pci 0000:00:1c.5: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.804666] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 1.809949] pci 0000:00:1e.0: bridge window [io disabled]
[ 1.815668] pci 0000:00:1e.0: bridge window [mem disabled]
[ 1.821386] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 1.827547] pci 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.833274] alloc irq_desc for 17 on node -1
[ 1.833279] alloc kstat_irqs on node -1
[ 1.833291] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.840051] pci 0000:00:1c.0: setting latency timer to 64
[ 1.840063] pci 0000:00:1c.3: enabling device (0106 -> 0107)
[ 1.845782] alloc irq_desc for 19 on node -1
[ 1.845786] alloc kstat_irqs on node -1
[ 1.845795] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.852554] pci 0000:00:1c.3: setting latency timer to 64
[ 1.852567] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.859327] pci 0000:00:1c.4: setting latency timer to 64
[ 1.859340] alloc irq_desc for 16 on node -1
[ 1.859344] alloc kstat_irqs on node -1
[ 1.859353] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.866117] pci 0000:00:1c.5: setting latency timer to 64
[ 1.866128] pci 0000:00:1e.0: setting latency timer to 64
[ 1.866135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.866140] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.866145] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.866151] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.866156] pci_bus 0000:00: resource 8 [mem 0x7f700000-0xdfffffff]
[ 1.866161] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.866167] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 1.866172] pci_bus 0000:01: resource 1 [mem 0x7f700000-0x7f8fffff]
[ 1.866178] pci_bus 0000:01: resource 2 [mem 0x7f900000-0x7fafffff 64bit pref]
[ 1.866184] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.866189] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 1.866194] pci_bus 0000:02: resource 2 [mem 0x7fb00000-0x7fcfffff 64bit pref]
[ 1.866200] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
[ 1.866205] pci_bus 0000:03: resource 1 [mem 0x7fd00000-0x800fffff]
[ 1.866211] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 1.866216] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 1.866221] pci_bus 0000:04: resource 1 [mem 0x80100000-0x804fffff]
[ 1.866227] pci_bus 0000:04: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
[ 1.866233] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 1.866238] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 1.866243] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.866248] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 1.866253] pci_bus 0000:05: resource 8 [mem 0x7f700000-0xdfffffff]
[ 1.866258] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]
[ 1.866310] NET: Registered protocol family 2
[ 1.870810] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.878886] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 1.889082] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.896487] TCP: Hash tables configured (established 262144 bind 65536)
[ 1.903171] TCP reno registered
[ 1.906376] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.912466] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 1.919176] NET: Registered protocol family 1
[ 1.923889] RPC: Registered udp transport module.
[ 1.928657] RPC: Registered tcp transport module.
[ 1.933420] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.939937] pci 0000:00:02.0: Boot video device
[ 1.940155] PCI: CLS 32 bytes, default 64
[ 1.940249] Trying to unpack rootfs image as initramfs...
[ 1.946103] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 1.955423] Freeing initrd memory: 1824k freed
[ 1.964538] audit: initializing netlink socket (disabled)
[ 1.970022] type=2000 audit(1533817469.969:1): initialized
[ 1.975945] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.988915] VFS: Disk quotas dquot_6.5.2
[ 1.993076] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.001339] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.007808] FS-Cache: Netfs 'nfs' registered for caching
[ 2.013599] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 2.020549] Registering the dns_resolver key type
[ 2.025331] ROMFS MTD (C) 2007 Red Hat, Inc.
[ 2.029785] fuse init (API version 7.13)
[ 2.034642] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2.043634] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2.055093] SGI XFS Quota Management subsystem
[ 2.059623] msgmni has been set to 3985
[ 2.063982] alg: No test for cipher_null (cipher_null-generic)
[ 2.069942] alg: No test for ecb(cipher_null) (ecb-cipher_null)
[ 2.075988] alg: No test for digest_null (digest_null-generic)
[ 2.081938] alg: No test for compress_null (compress_null-generic)
[ 2.090040] alg: No test for stdrng (krng)
[ 2.112372] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 2.118369] async_tx: api initialized (async)
[ 2.123102] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.130577] io scheduler noop registered
[ 2.134555] io scheduler deadline registered (default)
[ 2.140027] io scheduler cfq registered
[ 2.144045] ich9_gpio 0000:00:1f.0: : PMBASE = 0x00000800
[ 2.144052] ich9_gpio 0000:00:1f.0: : GPIOBASE = 0x00000480
[ 2.591792] ums8485md: lcm driver is register.
[ 2.596299] [btn_init] : ...
[ 2.596408] [btn_init] : up
[ 2.596414] [btn_init] : install acpi_install_gpe_handler ... WIX_BTN_POWER
[ 2.596419] [btn_init] : install acpi_install_gpe_handler ... LCD_SELECT_BUTTON
[ 2.596424] [btn_init] : install acpi_install_gpe_handler ... LCD_SCROLL_BUTTON
[ 2.596429] [btn_init] : install acpi_install_gpe_handler ... WIX_BTN_RESET
[ 2.596433] [btn_init] : install acpi_install_gpe_handler ... WIX_BTN_HDD_OVT
[ 2.596438] [btn_init] : install acpi_install_gpe_handler ... WIX_BTN_CPU_OVT
[ 2.596443] [btn_init] : install acpi_install_gpe_handler ... WIX_BTN_HDD_CHANGE
[ 2.596448] IRQ 9/button: IRQF_DISABLED is not guaranteed on shared IRQs
[ 2.603219] [btn_init] : btn driver is register.
[ 2.607979] i2c-core: driver [pca9538] registered
[ 2.608207] pcieport 0000:00:1c.0: setting latency timer to 64
[ 2.608241] alloc irq_desc for 24 on node -1
[ 2.608246] alloc kstat_irqs on node -1
[ 2.608260] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 2.608579] pcieport 0000:00:1c.3: setting latency timer to 64
[ 2.608611] alloc irq_desc for 25 on node -1
[ 2.608615] alloc kstat_irqs on node -1
[ 2.608626] pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
[ 2.608945] pcieport 0000:00:1c.4: setting latency timer to 64
[ 2.608977] alloc irq_desc for 26 on node -1
[ 2.608981] alloc kstat_irqs on node -1
[ 2.608992] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 2.609310] pcieport 0000:00:1c.5: setting latency timer to 64
[ 2.609342] alloc irq_desc for 27 on node -1
[ 2.609346] alloc kstat_irqs on node -1
[ 2.609357] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 2.622659] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[ 2.629872] platform pc8736x_gpio.0: no device found
[ 2.634982] nsc_gpio initializing
[ 2.634988] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.641501] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.648402] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 5.668026] floppy0: no floppy controllers found
[ 5.676892] brd: module loaded
[ 5.682063] loop: module loaded
[ 5.685664] nbd: registered device at major 43
[ 5.694286] naswake: naswake driver is register.
[ 5.699998] ahci 0000:00:1f.2: version 3.0
[ 5.700022] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.706935] alloc irq_desc for 28 on node -1
[ 5.706939] alloc kstat_irqs on node -1
[ 5.706954] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 5.707011] ahci: SSS flag set, parallel bus scan disabled
[ 5.712601] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 5.720855] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 5.729632] ahci 0000:00:1f.2: setting latency timer to 64
[ 5.768158] scsi0 : ahci
[ 5.771075] scsi1 : ahci
[ 5.773852] scsi2 : ahci
[ 5.776613] scsi3 : ahci
[ 5.779369] scsi4 : ahci
[ 5.782140] scsi5 : ahci
[ 5.785135] ata1: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b100 irq 28
[ 5.792615] ata2: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b180 irq 28
[ 5.800086] ata3: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b200 irq 28
[ 5.807561] ata4: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b280 irq 28
[ 5.815034] ata5: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b300 irq 28
[ 5.822506] ata6: SATA max UDMA/133 abar m2048@0xfea7b000 port 0xfea7b380 irq 28
[ 5.830394] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 5.836380] e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
[ 5.842563] tun: Universal TUN/TAP device driver, 1.6
[ 5.847676] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 5.854049] r8168 Gigabit Ethernet driver 8.023.00-NAPI loaded
[ 5.861887] r8168 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.868841] r8168 0000:03:00.0: setting latency timer to 64
[ 5.868901] alloc irq_desc for 29 on node -1
[ 5.868905] alloc kstat_irqs on node -1
[ 5.868923] r8168 0000:03:00.0: irq 29 for MSI/MSI-X
[ 5.869155] eth%d: RTL8168B/8111B at 0xffffc900106d2000, 00:d0:b8:0f:90:35, IRQ 29
[ 6.020445] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 6.035328] eth0: Identified chip type is 'RTL8168E/8111E'.
[ 6.035334] r8168 Copyright (C) 2011 Realtek NIC software team <nicfae@realtek.com>
[ 6.035337] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 6.035340] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 6.066440] r8168 Gigabit Ethernet driver 8.023.00-NAPI loaded
[ 6.072365] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.079328] r8168 0000:04:00.0: setting latency timer to 64
[ 6.079381] alloc irq_desc for 30 on node -1
[ 6.079385] alloc kstat_irqs on node -1
[ 6.079401] r8168 0000:04:00.0: irq 30 for MSI/MSI-X
[ 6.079633] eth%d: RTL8168B/8111B at 0xffffc900106d6000, 00:d0:b8:0f:90:36, IRQ 30
[ 6.204038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6.211521] ata1.00: ATA-8: Hitachi HDS723020BLA642, MN6OA5C0, max UDMA/133
[ 6.218546] ata1.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 6.227077] ata1.00: configured for UDMA/133
[ 6.230990] r8168: This product is covered by one or more of the following patents: US5,307,459, US5,434,872, US5,732,094, US6,570,884, US6,115,776, and US6,327,625.
[ 6.230998] eth1: Identified chip type is 'RTL8168E/8111E'.
[ 6.231003] r8168 Copyright (C) 2011 Realtek NIC software team <nicfae@realtek.com>
[ 6.231006] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
[ 6.231009] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
[ 6.231369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.231416] alloc irq_desc for 18 on node -1
[ 6.231420] alloc kstat_irqs on node -1
[ 6.231431] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.231461] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 6.231468] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 6.231633] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 6.231688] ehci_hcd 0000:00:1a.7: debug port 1
[ 6.235593] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 6.235627] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfea7bc00
[ 6.248020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 6.248059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.248064] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.248069] usb usb1: Product: EHCI Host Controller
[ 6.248072] usb usb1: Manufacturer: Linux 2.6.34.2 ehci_hcd
[ 6.248076] usb usb1: SerialNumber: 0000:00:1a.7
[ 6.248364] hub 1-0:1.0: USB hub found
[ 6.248374] hub 1-0:1.0: 6 ports detected
[ 6.248620] alloc irq_desc for 23 on node -1
[ 6.248624] alloc kstat_irqs on node -1
[ 6.248637] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.248665] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 6.248670] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 6.248823] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 6.248875] ehci_hcd 0000:00:1d.7: debug port 1
[ 6.252772] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 6.252804] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea7b800
[ 6.264030] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 6.264069] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.264074] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.264079] usb usb2: Product: EHCI Host Controller
[ 6.264082] usb usb2: Manufacturer: Linux 2.6.34.2 ehci_hcd
[ 6.264086] usb usb2: SerialNumber: 0000:00:1d.7
[ 6.264374] hub 2-0:1.0: USB hub found
[ 6.264385] hub 2-0:1.0: 6 ports detected
[ 6.264698] 116x: driver isp116x-hcd, 03 Nov 2005
[ 6.264786] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.264885] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.265087] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.265102] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 6.265107] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 6.265260] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 6.265322] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c880
[ 6.265403] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.265408] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.265413] usb usb3: Product: UHCI Host Controller
[ 6.265416] usb usb3: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.265420] usb usb3: SerialNumber: 0000:00:1a.0
[ 6.265717] hub 3-0:1.0: USB hub found
[ 6.265727] hub 3-0:1.0: 2 ports detected
[ 6.265959] alloc irq_desc for 21 on node -1
[ 6.265963] alloc kstat_irqs on node -1
[ 6.265976] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 6.265990] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 6.265995] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 6.266140] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 6.266199] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c800
[ 6.266280] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.266284] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.266289] usb usb4: Product: UHCI Host Controller
[ 6.266292] usb usb4: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.266296] usb usb4: SerialNumber: 0000:00:1a.1
[ 6.266593] hub 4-0:1.0: USB hub found
[ 6.266603] hub 4-0:1.0: 2 ports detected
[ 6.266829] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 6.266840] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 6.266846] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 6.266995] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 6.267055] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c480
[ 6.267137] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.267142] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.267146] usb usb5: Product: UHCI Host Controller
[ 6.267150] usb usb5: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.267153] usb usb5: SerialNumber: 0000:00:1a.2
[ 6.267447] hub 5-0:1.0: USB hub found
[ 6.267457] hub 5-0:1.0: 2 ports detected
[ 6.267683] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 6.267698] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 6.267703] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 6.267842] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 6.267883] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c400
[ 6.267961] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.267966] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.267970] usb usb6: Product: UHCI Host Controller
[ 6.267974] usb usb6: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.267977] usb usb6: SerialNumber: 0000:00:1d.0
[ 6.268253] hub 6-0:1.0: USB hub found
[ 6.268263] hub 6-0:1.0: 2 ports detected
[ 6.268484] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 6.268497] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 6.268504] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 6.268656] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 6.268697] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c080
[ 6.268774] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.268779] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.268783] usb usb7: Product: UHCI Host Controller
[ 6.268787] usb usb7: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.268790] usb usb7: SerialNumber: 0000:00:1d.1
[ 6.269068] hub 7-0:1.0: USB hub found
[ 6.269081] hub 7-0:1.0: 2 ports detected
[ 6.269303] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.269315] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 6.269320] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 6.269463] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 6.269519] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c000
[ 6.269600] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.269605] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.269609] usb usb8: Product: UHCI Host Controller
[ 6.269613] usb usb8: Manufacturer: Linux 2.6.34.2 uhci_hcd
[ 6.269616] usb usb8: SerialNumber: 0000:00:1d.2
[ 6.269894] hub 8-0:1.0: USB hub found
[ 6.269906] hub 8-0:1.0: 2 ports detected
[ 6.270252] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 6.270300] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 6.270307] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 6.270452] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 6.413146] xhci_hcd 0000:02:00.0: irq 19, io mem 0xfebf0000
[ 6.413217] usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 6.413239] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[ 6.413243] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.413248] usb usb9: Product: xHCI Host Controller
[ 6.413252] usb usb9: Manufacturer: Linux 2.6.34.2 xhci_hcd
[ 6.413255] usb usb9: SerialNumber: 0000:02:00.0
[ 6.413452] xHCI xhci_add_endpoint called for root hub
[ 6.413456] xHCI xhci_check_bandwidth called for root hub
[ 6.413591] hub 9-0:1.0: USB hub found
[ 6.413611] hub 9-0:1.0: 2 ports detected
[ 6.413924] sl811: driver sl811-hcd, 19 May 2005
[ 6.414006] r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
[ 6.414165] Initializing USB Mass Storage driver...
[ 6.414323] usbcore: registered new interface driver usb-storage
[ 6.414327] USB Mass Storage support registered.
[ 6.414666] PNP: No PS/2 controller found. Probing ports directly.
[ 6.624022] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 6.668614] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.668888] mice: PS/2 mouse device common for all mice
[ 6.669031] rtc_cmos 00:03: RTC can wake from S4
[ 6.669173] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 6.669217] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 6.669296] i2c /dev entries driver
[ 6.669447] i2c-core: driver [dev_driver] registered
[ 6.669491] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.669503] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.669623] i2c i2c-0: adapter [SMBus I801 adapter at 0400] registered
[ 6.669636] i2c i2c-0: found normal entry for adapter 0, addr 0x70
[ 6.680523] i2c i2c-0: Creating pca9538 at 0x70
[ 6.680555] i2c 0-0070: uevent
[ 6.680627] pca9538 0-0070: probe
[ 6.680633] [pca9538_probe] : detect 6 slot.
[ 6.696526] [pca9538_probe] : hdd info : 0xf0
[ 6.696533] i2c i2c-0: client [pca9538] registered with bus id 0-0070
[ 6.696662] i2c-dev: adapter [SMBus I801 adapter at 0400] registered as minor 0
[ 6.696761] F71808E-[f71808e_find] : find device 00001934
[ 6.696800] F71808E-[f71808e_find] : Found f71808e chip at 0xa00, revision 49
[ 6.696806] F71808E-[f71808e_init] : address is 00000a00
[ 6.696984] F71808E-[f71808e_probe] : start_reg is 00000003
[ 6.697327] F71808E-[f71808e_probe] : [f71808e_probe] 6 port sata
[ 6.697404] i2c-core: driver [f75393] registered
[ 6.697413] i2c i2c-0: found normal entry for adapter 0, addr 0x4c
[ 6.708520] [f75393_detect] : ...
[ 6.748526] i2c i2c-0: found f75393 version: 30
[ 6.748530] i2c i2c-0: found f75393
[ 6.748534] i2c i2c-0: Creating f75393 at 0x4c
[ 6.748572] i2c 0-004c: uevent
[ 6.748640] f75393 0-004c: probe
[ 6.748643] [f75393_probe] : ...
[ 6.748736] i2c i2c-0: client [f75393] registered with bus id 0-004c
[ 6.748772] f71808e_wdt: Found f71808fg watchdog chip, revision 49
[ 6.748930] md: linear personality registered for level -1
[ 6.748934] md: raid0 personality registered for level 0
[ 6.748937] md: raid1 personality registered for level 1
[ 6.748941] md: raid10 personality registered for level 10
[ 6.748944] md: raid6 personality registered for level 6
[ 6.748948] md: raid5 personality registered for level 5
[ 6.748951] md: raid4 personality registered for level 4
[ 6.748955] md: multipath personality registered for level -4
[ 6.748958] md: faulty personality registered for level -5
[ 6.749250] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 6.749394] cpuidle: using governor ladder
[ 6.749399] cpuidle: using governor menu
[ 6.749408] No iBFT detected.
[ 6.751639] usbcore: registered new interface driver hiddev
[ 6.751735] usbcore: registered new interface driver usbhid
[ 6.751739] usbhid: USB HID core driver
[ 6.752249] TCP cubic registered
[ 6.752813] NET: Registered protocol family 10
[ 6.753630] lo: Disabled Privacy Extensions
[ 6.754875] Mobile IPv6
[ 6.754881] NET: Registered protocol family 17
[ 6.754904] Bluetooth: L2CAP ver 2.14
[ 6.754907] Bluetooth: L2CAP socket layer initialized
[ 6.754993] Bluetooth: RFCOMM socket layer initialized
[ 6.754998] Bluetooth: RFCOMM ver 1.11
[ 6.755033] 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
[ 6.755037] All bugs added by David S. Miller <davem@redhat.com>
[ 6.755432] PM: Resume from disk failed.
[ 6.755445] registered taskstats version 1
[ 6.829525] usb 2-1: New USB device found, idVendor=090c, idProduct=1000
[ 6.829532] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.829538] usb 2-1: Product: USB DISK
[ 6.829542] usb 2-1: Manufacturer: SMI Corporation
[ 6.829547] usb 2-1: SerialNumber: AA04012700008704
[ 6.841814] scsi6 : usb-storage 2-1:1.0
[ 7.175106] rtc_cmos 00:03: setting system clock to 2018-08-09 12:24:35 UTC (1533817475)
[ 7.183286] BIOS EDD facility v0.16 2004-Jun-25, 5 devices found
[ 7.192187] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72302 MN6O PQ: 0 ANSI: 5
[ 7.201108] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.201230] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.214450] sd 0:0:0:0: [sda] Write Protect is off
[ 7.219302] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.219362] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.228834] sda: sda1 sda2
[ 7.259183] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.840766] scsi 6:0:0:0: Direct-Access SMI USB DISK 0100 PQ: 0 ANSI: 0 CCS
[ 7.849898] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 7.855370] sd 6:0:0:0: [sdb] 1957888 512-byte logical blocks: (1.00 GB/956 MiB)
[ 7.863602] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.868459] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 7.868463] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.877103] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.883263] sdb: sdb1
[ 7.888098] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.894256] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 7.924029] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 7.931517] ata2.00: ATA-8: Hitachi HDS723020BLA642, MN6OA5C0, max UDMA/133
[ 7.938541] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 7.947080] ata2.00: configured for UDMA/133
[ 7.964168] scsi 1:0:0:0: Direct-Access ATA Hitachi HDS72302 MN6O PQ: 0 ANSI: 5
[ 7.972729] sd 1:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 7.972915] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 7.986046] sd 1:0:0:0: [sdc] Write Protect is off
[ 7.990898] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 7.990957] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.000393] sdc: sdc1 sdc2
[ 8.033241] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 8.696023] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 8.703504] ata3.00: ATA-8: Hitachi HDS723020BLA642, MN6OA5C0, max UDMA/133
[ 8.710535] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 8.719073] ata3.00: configured for UDMA/133
[ 8.736162] scsi 2:0:0:0: Direct-Access ATA Hitachi HDS72302 MN6O PQ: 0 ANSI: 5
[ 8.744709] sd 2:0:0:0: [sdd] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 8.744921] sd 2:0:0:0: Attached scsi generic sg3 type 0
[ 8.758040] sd 2:0:0:0: [sdd] Write Protect is off
[ 8.762891] sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 8.762950] sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.772376] sdd: sdd1 sdd2
[ 8.831519] sd 2:0:0:0: [sdd] Attached SCSI disk
[ 9.468023] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 9.475517] ata4.00: ATA-8: Hitachi HDS723020BLA642, MN6OA5C0, max UDMA/133
[ 9.482557] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 9.491096] ata4.00: configured for UDMA/133
[ 9.508179] scsi 3:0:0:0: Direct-Access ATA Hitachi HDS72302 MN6O PQ: 0 ANSI: 5
[ 9.516731] sd 3:0:0:0: [sde] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 9.516934] sd 3:0:0:0: Attached scsi generic sg4 type 0
[ 9.530046] sd 3:0:0:0: [sde] Write Protect is off
[ 9.534896] sd 3:0:0:0: [sde] Mode Sense: 00 3a 00 00
[ 9.534955] sd 3:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.544386] sde: sde1 sde2
[ 9.611467] sd 3:0:0:0: [sde] Attached SCSI disk
[ 9.836022] ata5: SATA link down (SStatus 0 SControl 300)
[ 10.176020] ata6: SATA link down (SStatus 0 SControl 300)
[ 10.196055] md: Waiting for all devices to be available before autodetect
[ 10.202918] md: If you don't use raid, use raid=noautodetect
[ 10.209050] md: Autodetecting RAID arrays.
[ 10.213208] md: Scanned 0 and added 0 devices.
[ 10.217709] md: autorun ...
[ 10.220547] md: ... autorun DONE.
[ 10.223966] RAMDISK: gzip image found at block 0
[ 10.342789] EXT2-fs (ram0): warning: checktime reached, running e2fsck is recommended
[ 10.350838] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 10.369209] [btn_ioctl] : ...
[ 11.369291] [btn_ioctl] : ...
[ 12.369347] [btn_ioctl] : ...
[ 13.369423] [btn_ioctl] : ...
[ 14.369527] [btn_ioctl] : ...
[ 15.369602] [btn_ioctl] : ...
[ 16.369674] [btn_ioctl] : ...
[ 17.369749] [btn_ioctl] : ...
[ 18.369852] [btn_ioctl] : ...
[ 19.369928] [btn_ioctl] : ...
[ 30.427605] EXT2-fs (sdb1): warning: mounting unchecked fs, running e2fsck is recommended
[ 30.448103] SQUASHFS error: Xattrs in filesystem, these will be ignored
[ 30.916948] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 30.923863] usbcore: registered new interface driver btusb
[ 30.952923] usbcore: registered new interface driver usblp
[ 31.135179] Freeing unused kernel memory: 448k freed
[ 31.141494] Write protecting the kernel read-only data: 8192k
[ 31.148291] Freeing unused kernel memory: 1004k freed
[ 31.154192] Freeing unused kernel memory: 196k freed
root@storage-itp:/#

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Fri Aug 10, 2018 7:17 am

I see no hardware problems. So it's likely 'only' a damaged filesystem.

Can you post the output of

Code: Select all

cat /proc/mounts
cat /proc/partitions
cat /proc/mdstat
And a 2nd question, how valuable is your data? An attempt to repair the filesystem can cause more damage. So in case of valuable data you shouldn't try to repair the filesystem, but a bit-for-bit copy. In which case you need an extra disk, at least the size of the filesystem.

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Fri Aug 10, 2018 10:53 am

Thanks Mijzelf,

the data in the Hive is not very important, but the data in Software is, in Software I have a lot of software with installation keys for PLC programming.
I have two disks of 2T each that i can put in the two slots that are empty now on the NAS.

following the results of your first question.

root@storage-itp:/# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root.old /initrd ext2 rw,relatime,errors=continue 0 0
none / tmpfs rw,relatime,size=51200k,nr_inodes=255082 0 0
/dev/sdd1 /boot ext2 rw,relatime,errors=continue 0 0
/dev/loop0 /mnt/apps squashfs ro,relatime 0 0
/dev/loop1 /etc ext2 rw,sync,noatime 0 0
/dev/loop2 /oem cramfs ro,relatime 0 0
proc /proc proc rw,relatime 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
none /proc/fs/nfsd nfsd rw,relatime 0 0
none /sys sysfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /mnt/apps/lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
/dev/mapper/5cf487bd_vg-vol1 /mnt/system xfs rw,noatime,attr2,inode64,logbufs=8,noquota 0 0
/dev/mapper/73e7530f_vg-lv161e5b81 /mnt/pools/A/A0 xfs rw,noatime,attr2,logbufs=8,noquota 0 0


root@storage-itp:/# cat /proc/partitions
major minor #blocks name

7 0 206580 loop0
7 1 8192 loop1
7 2 724 loop2
8 0 1953514584 sda
8 1 20980888 sda1
8 2 1932533625 sda2
8 16 1953514584 sdb
8 17 20980888 sdb1
8 18 1932533625 sdb2
8 32 1953514584 sdc
8 33 20980888 sdc1
8 34 1932533625 sdc2
8 48 978944 sdd
8 49 978081 sdd1
8 64 1953514584 sde
8 65 20980888 sde1
8 66 1932533625 sde2
9 0 20980816 md0
9 1 5797599744 md1
253 0 5796528128 dm-0
253 1 20979712 dm-1


root@storage-itp:/# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty]
md1 : active raid5 sda2[0] sde2[3] sdc2[2] sdb2[1]
5797599744 blocks super 1.0 level 5, 512k chunk, algorithm 2 [4/4] [UUUU]

md0 : active raid1 sda1[0] sde1[3] sdc1[2] sdb1[1]
20980816 blocks super 1.0 [4/4] [UUUU]

unused devices: <none>
root@storage-itp:/#

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Fri Aug 10, 2018 2:58 pm

I have two disks of 2T each that i can put in the two slots that are empty now on the NAS.
That's not enough, I'm afraid.
Looking at your post, the volume mounted on /mnt/pools/A/A0 is /dev/dm-0, which is 5796528128 kB. Almost 6TB. Using 2 2TB disks a raid0 array of 4TB can be made.
The good news is that an attempt to repair can be relatively easy, as there are no double or bind mounts. Are the xfs tools available? In this case that would be xfs_check and xfs_repair.

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Fri Aug 10, 2018 11:28 pm

Mijzelf,

seems like the tools are available.

maybe i can try to check first and repair later, how do I use the instruction?

root@storage-itp:/# xfs_check
Usage: xfs_check [-fsvV] [-l logdev] [-i ino]... [-b bno]... special
root@storage-itp:/# xfs_repair
Usage: xfs_repair [options] device

Options:
-f The device is a file
-L Force log zeroing. Do this as a last resort.
-l logdev Specifies the device where the external log resides.
-m maxmem Maximum amount of memory to be used in megabytes.
-n No modify mode, just checks the filesystem for damage.
-P Disables prefetching.
-r rtdev Specifies the device where the realtime section resides.
-v Verbose output.
-c subopts Change filesystem parameters - use xfs_admin.
-o subopts Override default behaviour, refer to man page.
-t interval Reporting interval in minutes.
-d Repair dangerously.
-V Reports version and exits.
root@storage-itp:/#

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Sat Aug 11, 2018 7:49 am

Peter wrote:
Fri Aug 10, 2018 11:28 pm
maybe i can try to check first and repair later, how do I use the instruction?
man xfs_check. So basically

Code: Select all

umount /mnt/pools/A/A0
xfs_check /dev/mapper/73e7530f_vg-lv161e5b81
You can even do a 'dry run' on repairing, using the '-n' option of xfs_repair.

In both cases I don't know what kind of usable information could be found, but it won't hurt to try. (Unless the disk is dying. In that case each extra burden could kill it. The kernel log doesn't give reason to think so, but if the firmware can read the SMART, I'd certainly look at it before trying)

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Sat Aug 11, 2018 12:32 pm

Thank you Mijzelf,

Sorry for my "no" knowledge of linux but i´m learning a bit now.
the return of the instruction:

root@storage-itp:/# umount /mnt/pools/A/A0
root@storage-itp:/# xfs_check /dev/mapper/73e7530f_vg-lv161e5b81
/sbin/xfs_check: line 31: 16710 Killed xfs_db$DBOPTS -F -i -p xfs_check -c "check$OPTS" $1
root@storage-itp:/#

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Sat Aug 11, 2018 4:42 pm

That looks as if the called xfs_check is actually a script, which does some additional actions, before calling the 'orginal' xfs_check. But it's unclear to me why it prints that line.

You can find the executable by executing

Code: Select all

which xfs_check
and see if it's a script

Code: Select all

cat /full/path/to/xfs_check
.

I think the binary should be in /usr/sbin/, so if xfs_check is somewhere else, you can try

Code: Select all

/usr/sbin/xfs_check /dev/mapper/73e7530f_vg-lv161e5b81

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Sun Aug 12, 2018 10:10 am

Ok, the return is:

root@storage-itp:/# which xfs_check
/sbin/xfs_check
root@storage-itp:/# cat /full/path/to/xfs_check
cat: /full/path/to/xfs_check: No such file or directory

seems like xfs_check is in /sbin/

so I did: /sbin/xfs_check /dev/mapper/73e7530f_vg-lv161e5b81

but no return, the nas blocked, the time on the display didn´t change anymore and after the whole night was still the same I decided to switch the nas of and on again.

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Sun Aug 12, 2018 12:32 pm

Sorry I wasn't more clear. The idea was to find the executable using 'which', and then substitute the /full/path/to/, so in this case

Code: Select all

cat /sbin/xfs_check
That can give a bunch of garbage, if it is a binary, or something readable, when it's a script.
so I did: /sbin/xfs_check /dev/mapper/73e7530f_vg-lv161e5b81

but no return, the nas blocked,
So you basically executed the xfs_check twice. If it's a script, it does something extra, and that could be something which shouldn't be run twice.

Peter
Posts: 12
Joined: Wed Aug 08, 2018 3:31 pm

Re: px6-300d: Need Help to access a volume

Post by Peter » Sun Aug 12, 2018 1:42 pm

Sorry Mijzelf for me not understanding.

the return of your last quest:

root@storage-itp:/# cat /sbin/xfs_check
#!/bin/sh -f
#
# Copyright (c) 2000-2003 Silicon Graphics, Inc. All Rights Reserved.
#

OPTS=" "
DBOPTS=" "
USAGE="Usage: xfs_check [-fsvV] [-l logdev] [-i ino]... [-b bno]... special"

while getopts "b:fi:l:stvV" c
do
case $c in
s) OPTS=$OPTS"-s ";;
t) OPTS=$OPTS"-t ";;
v) OPTS=$OPTS"-v ";;
i) OPTS=$OPTS"-i "$OPTARG" ";;
b) OPTS=$OPTS"-b "$OPTARG" ";;
f) DBOPTS=$DBOPTS" -f";;
l) DBOPTS=$DBOPTS" -l "$OPTARG" ";;
V) xfs_db -p xfs_check -V
status=$?
exit $status
;;
\?) echo $USAGE 1>&2
exit 2
;;
esac
done
set -- extra $@
shift $OPTIND
case $# in
1) xfs_db$DBOPTS -F -i -p xfs_check -c "check$OPTS" $1
status=$?
;;
*) echo $USAGE 1>&2
exit 2
;;
esac
exit $status
root@storage-itp:/#

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: px6-300d: Need Help to access a volume

Post by Mijzelf » Sun Aug 12, 2018 5:04 pm

This script basically calls xfs_db, which executable doesn't seem to have an online manual page, so I think it's Iomega specific. In that case it's strange that the copyright is from 2003, Silicon Graphics.

Anyway, looking at the commandline passed to xfs_db, I think it calls xfs_check. And the name xfs_db suggests it does something with a database.

So there still should be a binary instance of xfs_check. Try /usr/sbin/xfs_check

Post Reply