Recovery (Home Media CE) Complete Recovery not work

Post Reply
ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Wed Jun 10, 2015 4:10 am

Hi I 've tried the full recovery of HMNHD -CE 2TB , everything works fine , I can access the web administration but there is no storage space available.
"Could not initialize storage area manager" in log section.
"The selected function is not available due to the state of the pools" in add a share folder.
"Available storage: 0" in Managing Drives
any can help me?

thank in advance.

PD: in http://iomega.nas-central.org/wiki/Reco ... _Media_CE) in Recovery Boot section say "Wait until HMNHDCE powers down on its own.", but never power down, i think it reboot, I have waited almost 15 minutes and then income through web administration, I can access and view everything but without storage available

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by Mijzelf » Thu Jun 11, 2015 1:10 pm

Can you get shell access?

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Thu Jun 11, 2015 4:30 pm

Yes
Thanks gor your time

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by Mijzelf » Thu Jun 11, 2015 7:44 pm

Ok. Don't know what I'm searching for, so a blunderbuss: Can you post the output of

Code: Select all

dmesg
cat /proc/partitions
cat /proc/mounts
lvdisplay
fdisk -l

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Fri Jun 12, 2015 2:21 am

dmesg

7>[ 14.960000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 14.960000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 14.990000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 14.990000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.010000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.010000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.030000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.030000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.060000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.060000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.210000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.210000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.240000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.240000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.260000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.260000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.290000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.290000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.310000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.310000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.330000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.330000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.360000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.360000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.380000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.380000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.400000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.400000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.430000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.430000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.450000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.450000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.480000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.480000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.500000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.500000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.520000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.520000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.550000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.550000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.570000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.570000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.590000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.590000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.620000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.620000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.640000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.640000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.670000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.670000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.690000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.690000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.710000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.710000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.740000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.740000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.760000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.760000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.780000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.780000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.810000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.810000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.830000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.830000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.850000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.850000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.880000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.880000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.900000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.930000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.930000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.950000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.950000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 15.970000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 15.970000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 16.000000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 16.000000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 16.020000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 16.020000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 16.040000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 16.040000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 16.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 16.070000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 25.200000] CoPro offload is active on eth0
[ 25.200000] Alloc'ing ARM descs 8192 bytes
[ 25.210000] Alloc'ing CoPro parameters 40 bytes
[ 25.210000] gmac gmac.0: firmware: requesting gmac_copro_firmware
[ 25.420000] CoPro: Programming start address as 0xd000dd00
[ 25.520000] Heartbeats started
[ 25.520000] eth0: Resetting GMAC
[ 25.530000] eth0: GMAC reset complete
[ 25.530000] hw_set_mac_address() Storing port0 mac_adr in global array
[ 25.540000] eth0: Setting Rx flow control thresholds for LAN port
[ 25.550000] CoPro available SRAM end 0x1000dc64
[ 25.560000] Copro offload started
[ 26.060000] eth0: link up, 100Mbps, full-duplex, using pause, lpa 0x45E1
[ 90.560000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=1
[ 90.560000] i2c-adapter i2c-0: master_xfer[1] R, addr=0x51, len=13
[ 114.290000] XFS mounting filesystem dm-1
[ 114.370000] Ending clean XFS mount for filesystem: dm-1
[ 119.480000] ox820sata: reseting SATA core
[ 119.850000] ata1.00: configured for UDMA/133
[ 119.850000] ata1: EH complete
[ 129.140000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.150000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.150000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.160000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.170000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.170000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 129.180000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 169.340000] Adding 524280k swap on /mnt/system/swapfile. Priority:-1 extents:8 across:525444k
[ 3747.980000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3747.990000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3747.990000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3748.000000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3748.000000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3748.010000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 3748.010000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.680000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.690000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.690000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.700000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.700000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.710000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 7366.710000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.880000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.880000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.930000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.930000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[10984.940000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.640000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.650000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.650000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.660000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.660000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.670000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[14602.670000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.050000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.060000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.060000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[18222.080000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.340000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.350000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.350000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.360000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.360000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.370000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[21840.370000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.170000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.180000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.180000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.190000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.190000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.200000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[25458.200000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.050000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.060000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.060000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.080000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[29076.080000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.910000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.920000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[32693.920000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.640000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.650000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.650000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.660000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.660000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.670000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[36312.670000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.880000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.910000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[39931.910000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.890000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.900000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.910000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.910000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[43550.920000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.560000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.570000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.570000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.580000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.580000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.580000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[47172.590000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.070000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.080000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.080000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.090000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.100000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[50791.100000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.460000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.470000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.470000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.480000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.480000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.490000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[54410.490000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.780000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.780000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.790000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.790000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.800000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.800000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[58028.810000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.490000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.500000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.500000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.510000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.510000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.520000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[61648.520000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2


cat /proc/partitions
major minor #blocks name

7 0 439343 loop0
7 1 5120 loop1
7 2 52 loop2
8 0 1953514584 sda
8 1 20971520 sda1
9 0 20971456 md0
253 0 4194304 dm-0
253 1 16773120 dm-1


cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root.old /initrd ext2 rw,relatime,errors=continue 0 0
none / tmpfs rw,relatime,size=51200k,nr_inodes=31939 0 0
/dev/md0_vg/BFDlv /boot ext2 rw,noatime,errors=continue 0 0
/dev/loop0 /mnt/apps ext2 ro,relatime 0 0
/dev/loop1 /etc ext2 rw,sync,noatime 0 0
/dev/loop2 /oem cramfs ro,relatime 0 0
proc /proc proc rw,relatime 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
none /sys sysfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
tmpfs /mnt/apps/lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
/dev/mapper/md0_vg-vol1 /mnt/system xfs rw,noatime,attr2,inode64,logbufs=8,noquota 0 0

lvdisplay
--- Logical volume ---
LV Name /dev/md0_vg/BFDlv
VG Name md0_vg
LV UUID y1xYx6-2YW5-GOD3-eFBz-21gP-XY3H-skDzwp
LV Write Access read/write
LV Status available
# open 1
LV Size 4.00 GB
Current LE 1024
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0

--- Logical volume ---
LV Name /dev/md0_vg/vol1
VG Name md0_vg
LV UUID oW1gm8-X4aL-783t-aIZo-u8rh-Y0vq-FPlw8J
LV Write Access read/write
LV Status available
# open 1
LV Size 16.00 GB
Current LE 4095
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1

fdisk -l
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 2000.3 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00008000

Device Boot Start End Blocks Id System
/dev/sda1 1 121602 976762583+ ee EFI GPT

Disk /dev/md0: 21.4 GB, 21474770944 bytes
2 heads, 4 sectors/track, 5242864 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table


waiting for reply, thank you

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by Mijzelf » Fri Jun 12, 2015 8:57 am

Right. Your whole data partition is lacking. Here you can see how the disk should be divided. Use 'parted' to add a second partition sda2. Then use mdadm to create a raid array in it.

Code: Select all

mdadm --create /dev/md1 /dev/sda2 -n 1 -l raid1
Then create the volume group

Code: Select all

vgcreate abcdef01_vg /dev/md1
the logical volume

Code: Select all

lvcreate lv12345678 abcdef01_vg
and finally put a filesystem on it

Code: Select all

mkfs.xfs /dev/abcdef01_vg/lv12345678 
Reboot the box. If any of the commands fail, it makes no sense to continue, as they depend on each other.

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Fri Jun 12, 2015 12:21 pm

Thanks you! i will try and tell you the result :D

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Sat Jun 13, 2015 3:11 am

hi!, everything look good, but, no mount file system on reboot. i need to do manually in shell console and the resource is not available in web interface.

(i run a pvcreate before lvcreate) without this i cant create lv volumen.

here lvdisplay result (mount manually)

sh-3.2# lvdisplay
--- Logical volume ---
LV Name /dev/abcdef01_vg/lv12345678
VG Name abcdef01_vg
LV UUID xK0Vbj-8Uix-Cq1k-sIko-sz8i-UWip-NSuB5h
LV Write Access read/write
LV Status available
# open 0
LV Size 1.80 TB
Current LE 471803
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2

--- Logical volume ---
LV Name /dev/md0_vg/BFDlv
VG Name md0_vg
LV UUID y1xYx6-2YW5-GOD3-eFBz-21gP-XY3H-skDzwp
LV Write Access read/write
LV Status available
# open 1
LV Size 4.00 GB
Current LE 1024
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0

--- Logical volume ---
LV Name /dev/md0_vg/vol1
VG Name md0_vg
LV UUID 6Sww92-ypxa-jpf3-Mgt5-Tn8I-ywbu-l4pdU6
LV Write Access read/write
LV Status available
# open 1
LV Size 16.00 GB
Current LE 4095
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1

thanks in advance

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Sat Jun 13, 2015 3:35 am

sorry, more info. wen the system reboot the mount point for this lv disappears (/mnt/pools/A/A0)

kmdir /mnt/pools/A/A0, but when reboot are blank /mnt/pools/xxxx.

Mijzelf
Posts: 6251
Joined: Mon Jun 16, 2008 10:45 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by Mijzelf » Sat Jun 13, 2015 4:25 pm

Hm. I dived in the initrd scripts, and found that the imager does not create the data partition and/or the logical volume on it.

Code: Select all

create_partitions()
{
    local disk=$1

    echo "---Creating partitions"
	dd if=/dev/zero of=$1 bs=1M count=32

    parted $disk mklabel gpt
    parted $disk mkpart primary 65536s 42008576s
    parted $disk set 1 raid on

    wait
}

create_volumes()
{
    # create lvm volumes for BFD and System
	pvcreate -ff -y $MD0
	vgcreate $MD0VG $MD0
	lvcreate -L 4G -n $BFDLV $MD0VG
}
So apparently the user volume is create by the firmware, on first boot, or on user action. Are you sure there is no 'create volume' option in the webinterface?
According to this wiki page, the names of the volume group and logical volume should be different. Don't know if that means that the names are actually random, or that the CE is different from other Lifeline devices.

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Sat Jun 13, 2015 7:50 pm

Are you sure there is no 'create volume' option in the webinterface?

yes, but "0 free space for create volume"

maybe im in the wrong section? i can't fine any option to manage the 1.8tb of disk space to create new volume.

i reboot it 4 times, but, nothing.

I found a post where he said that to solve the problem of 0 space, need to do a factory reset, prove the full erase and the fast erase, but wen reboot nothing again.

very estrange. :?

any suggestion?
You do not have the required permissions to view the files attached to this post.

ronn
Posts: 8
Joined: Wed Jun 10, 2015 3:54 am

Re: Recovery (Home Media CE) Complete Recovery not work

Post by ronn » Sat Jun 13, 2015 8:20 pm

ok, finnaly i can do the job.

the fast restet could create the volume and file sharing, but, i created the lv and pv first as you have told me. and then I made a fast reset. Above with a clean installation of the first 32m and then install the firmware with USB drive process, did not work the fast reset. not whether coincidence or something I did wrong, but now everything is fine.

thanks for your time!

PD. i will reboot it again to see if any change.
You do not have the required permissions to view the files attached to this post.

niqu1982
Posts: 1
Joined: Sun Oct 11, 2015 6:24 pm

Re: Recovery (Home Media CE) Complete Recovery not work

Post by niqu1982 » Sun Oct 11, 2015 6:28 pm

Hi.
I have problem, my hard drive Iomega media center cloud edition After restart i have never ending "restart system please wait"

dmesg:
EH complete
[ 783.800000] ox820sata: reseting SATA core
[ 784.160000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 784.160000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 784.160000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 784.180000] ata1.00: status: { DRDY ERR }
[ 784.180000] ata1.00: error: { UNC }
[ 784.190000] ata1.00: configured for UDMA/133
[ 784.190000] ata1: EH complete
[ 784.750000] ox820sata: reseting SATA core
[ 785.110000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 785.110000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 785.110000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 785.130000] ata1.00: status: { DRDY ERR }
[ 785.130000] ata1.00: error: { UNC }
[ 785.140000] ata1.00: configured for UDMA/133
[ 785.140000] sd 0:0:0:0: [sda] Unhandled sense code
[ 785.140000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 785.150000] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 785.160000] Descriptor sense data with sense descriptors (in hex):
[ 785.160000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 785.170000] 00 00 f9 80
[ 785.170000] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 785.180000] end_request: I/O error, dev sda, sector 16841088
[ 785.180000] ata1: EH complete
[ 785.190000] ox820sata: reseting SATA core
[ 785.550000] ata1.00: configured for UDMA/133
[ 785.550000] ata1: EH complete
[ 1054.470000] XFS mounting filesystem dm-1
[ 1057.300000] ox820sata: reseting SATA core
[ 1057.660000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1057.660000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1057.660000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1057.680000] ata1.00: status: { DRDY ERR }
[ 1057.680000] ata1.00: error: { UNC }
[ 1057.690000] ata1.00: configured for UDMA/133
[ 1057.690000] ata1: EH complete
[ 1060.480000] ox820sata: reseting SATA core
[ 1060.830000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1060.830000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1060.830000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1060.850000] ata1.00: status: { DRDY ERR }
[ 1060.850000] ata1.00: error: { UNC }
[ 1060.860000] ata1.00: configured for UDMA/133
[ 1060.860000] ata1: EH complete
[ 1063.700000] ox820sata: reseting SATA core
[ 1064.060000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1064.060000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1064.060000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1064.080000] ata1.00: status: { DRDY ERR }
[ 1064.080000] ata1.00: error: { UNC }
[ 1064.090000] ata1.00: configured for UDMA/133
[ 1064.090000] ata1: EH complete
[ 1066.940000] ox820sata: reseting SATA core
[ 1067.310000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1067.310000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1067.310000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1067.330000] ata1.00: status: { DRDY ERR }
[ 1067.330000] ata1.00: error: { UNC }
[ 1067.340000] ata1.00: configured for UDMA/133
[ 1067.340000] ata1: EH complete
[ 1070.190000] ox820sata: reseting SATA core
[ 1070.470000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.470000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.480000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.480000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.490000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.490000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.500000] i2c-adapter i2c-0: master_xfer[0] W, addr=0x51, len=2
[ 1070.540000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1070.540000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1070.540000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1070.560000] ata1.00: status: { DRDY ERR }
[ 1070.560000] ata1.00: error: { UNC }
[ 1070.570000] ata1.00: configured for UDMA/133
[ 1070.570000] ata1: EH complete
[ 1073.400000] ox820sata: reseting SATA core
[ 1073.770000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1073.770000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1073.770000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1073.790000] ata1.00: status: { DRDY ERR }
[ 1073.790000] ata1.00: error: { UNC }
[ 1073.800000] ata1.00: configured for UDMA/133
[ 1073.800000] sd 0:0:0:0: [sda] Unhandled sense code
[ 1073.800000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 1073.810000] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 1073.820000] Descriptor sense data with sense descriptors (in hex):
[ 1073.820000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1073.830000] 00 80 f1 a0
[ 1073.830000] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 1073.840000] end_request: I/O error, dev sda, sector 25227680
[ 1073.840000] ata1: EH complete
[ 1073.850000] I/O error in filesystem ("dm-1") meta-data dev dm-1 block 0xfff020 ("xlog_bread") error 5 buf count 512
[ 1073.860000] XFS: empty log check failed
[ 1073.860000] XFS: log mount/recovery failed: error 5
[ 1073.870000] XFS: log mount failed
[ 1074.510000] ox820sata: reseting SATA core
[ 1074.880000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1074.880000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1074.880000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1074.900000] ata1.00: status: { DRDY ERR }
[ 1074.900000] ata1.00: error: { UNC }
[ 1074.910000] ata1.00: configured for UDMA/133
[ 1074.910000] ata1: EH complete
[ 1075.490000] ox820sata: reseting SATA core
[ 1075.850000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1075.850000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1075.850000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1075.870000] ata1.00: status: { DRDY ERR }
[ 1075.870000] ata1.00: error: { UNC }
[ 1075.880000] ata1.00: configured for UDMA/133
[ 1075.880000] ata1: EH complete
[ 1076.460000] ox820sata: reseting SATA core
[ 1076.830000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1076.830000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1076.830000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1076.850000] ata1.00: status: { DRDY ERR }
[ 1076.850000] ata1.00: error: { UNC }
[ 1076.860000] ata1.00: configured for UDMA/133
[ 1076.860000] ata1: EH complete
[ 1077.440000] ox820sata: reseting SATA core
[ 1077.800000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1077.800000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1077.800000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1077.820000] ata1.00: status: { DRDY ERR }
[ 1077.820000] ata1.00: error: { UNC }
[ 1077.830000] ata1.00: configured for UDMA/133
[ 1077.830000] ata1: EH complete
[ 1078.390000] ox820sata: reseting SATA core
[ 1078.750000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1078.750000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1078.750000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1078.770000] ata1.00: status: { DRDY ERR }
[ 1078.770000] ata1.00: error: { UNC }
[ 1078.780000] ata1.00: configured for UDMA/133
[ 1078.780000] ata1: EH complete
[ 1079.360000] ox820sata: reseting SATA core
[ 1079.720000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1079.720000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1079.720000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1079.740000] ata1.00: status: { DRDY ERR }
[ 1079.740000] ata1.00: error: { UNC }
[ 1079.750000] ata1.00: configured for UDMA/133
[ 1079.750000] sd 0:0:0:0: [sda] Unhandled sense code
[ 1079.760000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 1079.760000] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 1079.770000] Descriptor sense data with sense descriptors (in hex):
[ 1079.770000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1079.780000] 00 00 f9 80
[ 1079.780000] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 1079.790000] end_request: I/O error, dev sda, sector 16841088
[ 1079.790000] ata1: EH complete
[ 1079.890000] XFS mounting filesystem dm-1
[ 1082.720000] ox820sata: reseting SATA core
[ 1083.080000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1083.080000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1083.080000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1083.100000] ata1.00: status: { DRDY ERR }
[ 1083.100000] ata1.00: error: { UNC }
[ 1083.110000] ata1.00: configured for UDMA/133
[ 1083.110000] ata1: EH complete
[ 1085.940000] ox820sata: reseting SATA core
[ 1086.310000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1086.310000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1086.310000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1086.330000] ata1.00: status: { DRDY ERR }
[ 1086.330000] ata1.00: error: { UNC }
[ 1086.340000] ata1.00: configured for UDMA/133
[ 1086.340000] ata1: EH complete
[ 1089.180000] ox820sata: reseting SATA core
[ 1089.540000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1089.540000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1089.540000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1089.560000] ata1.00: status: { DRDY ERR }
[ 1089.560000] ata1.00: error: { UNC }
[ 1089.570000] ata1.00: configured for UDMA/133
[ 1089.570000] ata1: EH complete
[ 1092.410000] ox820sata: reseting SATA core
[ 1092.770000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1092.770000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1092.770000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1092.790000] ata1.00: status: { DRDY ERR }
[ 1092.790000] ata1.00: error: { UNC }
[ 1092.800000] ata1.00: configured for UDMA/133
[ 1092.800000] ata1: EH complete
[ 1095.640000] ox820sata: reseting SATA core
[ 1096.010000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1096.010000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1096.010000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1096.030000] ata1.00: status: { DRDY ERR }
[ 1096.030000] ata1.00: error: { UNC }
[ 1096.040000] ata1.00: configured for UDMA/133
[ 1096.040000] ata1: EH complete
[ 1098.880000] ox820sata: reseting SATA core
[ 1099.240000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1099.240000] ata1.00: cmd c8/00:01:a0:f1:80/00:00:00:00:00/e1 tag 0 dma 512 in
[ 1099.240000] res 51/40:00:a0:f1:80/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1099.260000] ata1.00: status: { DRDY ERR }
[ 1099.260000] ata1.00: error: { UNC }
[ 1099.270000] ata1.00: configured for UDMA/133
[ 1099.270000] sd 0:0:0:0: [sda] Unhandled sense code
[ 1099.270000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 1099.280000] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 1099.290000] Descriptor sense data with sense descriptors (in hex):
[ 1099.290000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1099.300000] 00 80 f1 a0
[ 1099.300000] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 1099.310000] end_request: I/O error, dev sda, sector 25227680
[ 1099.310000] ata1: EH complete
[ 1099.320000] I/O error in filesystem ("dm-1") meta-data dev dm-1 block 0xfff020 ("xlog_bread") error 5 buf count 512
[ 1099.330000] XFS: empty log check failed
[ 1099.340000] XFS: log mount/recovery failed: error 5
[ 1099.340000] XFS: log mount failed
[ 1099.990000] ox820sata: reseting SATA core
[ 1100.350000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1100.350000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1100.350000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1100.370000] ata1.00: status: { DRDY ERR }
[ 1100.370000] ata1.00: error: { UNC }
[ 1100.400000] ata1.00: configured for UDMA/133
[ 1100.400000] ata1: EH complete
[ 1100.980000] ox820sata: reseting SATA core
[ 1101.340000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1101.340000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1101.340000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1101.360000] ata1.00: status: { DRDY ERR }
[ 1101.360000] ata1.00: error: { UNC }
[ 1101.370000] ata1.00: configured for UDMA/133
[ 1101.370000] ata1: EH complete
[ 1101.950000] ox820sata: reseting SATA core
[ 1102.320000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1102.320000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1102.320000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1102.340000] ata1.00: status: { DRDY ERR }
[ 1102.340000] ata1.00: error: { UNC }
[ 1102.350000] ata1.00: configured for UDMA/133
[ 1102.360000] ata1: EH complete
[ 1102.920000] ox820sata: reseting SATA core
[ 1103.280000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1103.280000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1103.280000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1103.300000] ata1.00: status: { DRDY ERR }
[ 1103.300000] ata1.00: error: { UNC }
[ 1103.310000] ata1.00: configured for UDMA/133
[ 1103.310000] ata1: EH complete
[ 1103.890000] ox820sata: reseting SATA core
[ 1104.260000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1104.260000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1104.260000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1104.280000] ata1.00: status: { DRDY ERR }
[ 1104.280000] ata1.00: error: { UNC }
[ 1104.290000] ata1.00: configured for UDMA/133
[ 1104.290000] ata1: EH complete
[ 1104.870000] ox820sata: reseting SATA core
[ 1105.230000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1105.230000] ata1.00: cmd c8/00:04:80:f9:00/00:00:00:00:00/e1 tag 0 dma 2048 in
[ 1105.230000] res 51/40:00:80:f9:00/00:00:00:00:00/00 Emask 0x9 (media error)
[ 1105.250000] ata1.00: status: { DRDY ERR }
[ 1105.250000] ata1.00: error: { UNC }
[ 1105.260000] ata1.00: configured for UDMA/133
[ 1105.260000] sd 0:0:0:0: [sda] Unhandled sense code
[ 1105.260000] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 1105.270000] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 1105.280000] Descriptor sense data with sense descriptors (in hex):
[ 1105.280000] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 1105.290000] 00 00 f9 80
[ 1105.290000] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 1105.300000] end_request: I/O error, dev sda, sector 16841088
[ 1105.300000] ata1: EH complete
[ 1105.310000] ox820sata: reseting SATA core
[ 1105.670000] ata1.00: configured for UDMA/133
[ 1105.670000] ata1: EH complete

cat /proc/partition

root@dlna:/etc# cat /proc/partitions
major minor #blocks name

7 0 471132 loop0
7 1 8192 loop1
7 2 60 loop2
8 0 976762584 sda
8 1 20971520 sda1
8 2 955758261 sda2
9 0 20971456 md0
253 0 4194304 dm-0
253 1 16773120 dm-1
9 1 955758208 md1
253 2 955756544 dm-2

root@dlna:/etc# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root.old /initrd ext2 rw,relatime,errors=continue 0 0
none / tmpfs rw,relatime,size=51200k,nr_inodes=31939 0 0
/dev/md0_vg/BFDlv /boot ext2 rw,noatime,errors=continue 0 0
/dev/loop0 /mnt/apps ext2 ro,relatime 0 0
/dev/loop1 /etc ext2 rw,sync,noatime 0 0
/dev/loop2 /oem cramfs ro,relatime 0 0
proc /proc proc rw,relatime 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
none /sys sysfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
tmpfs /mnt/apps/lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0

root@dlna:/etc# cat /proc/partitions
major minor #blocks name

7 0 471132 loop0
7 1 8192 loop1
7 2 60 loop2
8 0 976762584 sda
8 1 20971520 sda1
8 2 955758261 sda2
9 0 20971456 md0
253 0 4194304 dm-0
253 1 16773120 dm-1
9 1 955758208 md1
253 2 955756544 dm-2
root@dlna:/etc# cat /proc/mounts
rootfs / rootfs rw 0 0
/dev/root.old /initrd ext2 rw,relatime,errors=continue 0 0
none / tmpfs rw,relatime,size=51200k,nr_inodes=31939 0 0
/dev/md0_vg/BFDlv /boot ext2 rw,noatime,errors=continue 0 0
/dev/loop0 /mnt/apps ext2 ro,relatime 0 0
/dev/loop1 /etc ext2 rw,sync,noatime 0 0
/dev/loop2 /oem cramfs ro,relatime 0 0
proc /proc proc rw,relatime 0 0
none /proc/bus/usb usbfs rw,relatime 0 0
none /sys sysfs rw,relatime 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620 0 0
tmpfs /mnt/apps/lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0
root@dlna:/etc# lvdisplay
--- Logical volume ---
LV Name /dev/c1625d9_vg/lv57a6eb8
VG Name c1625d9_vg
LV UUID 2Ei2fI-HGh9-U6Ac-VQAv-j6fN-iYmV-rrQSJn
LV Write Access read/write
LV Status available
# open 0
LV Size 911.48 GB
Current LE 233339
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:2

--- Logical volume ---
LV Name /dev/md0_vg/BFDlv
VG Name md0_vg
LV UUID iab1Sk-DQfk-WlZI-Hb0r-WyUo-LRTn-EuAkR3
LV Write Access read/write
LV Status available
# open 1
LV Size 4.00 GB
Current LE 1024
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:0

--- Logical volume ---
LV Name /dev/md0_vg/vol1
VG Name md0_vg
LV UUID MaW2hM-Q41Z-92Xz-ukM7-W03W-2qDy-0wo91W
LV Write Access read/write
LV Status available
# open 0
LV Size 16.00 GB
Current LE 4095
Segments 1
Allocation inherit
Read ahead sectors auto
- currently set to 256
Block device 253:1


root@dlna:/etc# fdisk -l

WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00008000

Device Boot Start End Blocks Id System
/dev/sda1 1 121602 976762583+ ee EFI GPT

Disk /dev/md0: 21.4 GB, 21474770944 bytes
2 heads, 4 sectors/track, 5242864 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md0 doesn't contain a valid partition table

Disk /dev/md1: 978.6 GB, 978696404992 bytes
2 heads, 4 sectors/track, 238939552 cylinders
Units = cylinders of 8 * 512 = 4096 bytes
Disk identifier: 0x00000000

Disk /dev/md1 doesn't contain a valid partition table


Any idea ?

Post Reply